How to extend the life of a constant temperature and humidity test chamber

The compressor of the constant temperature and humidity test chamber is the core part of the equipment. How can we extend the service life of the constant temperature and humidity test chamber ingeniously? The environmental testing equipment industry expert Dongguan Yuanyao Technical Department has summed up the following points for you:

First, plant requirements

1. There must be more than 60cm space around the equipment;

2. The device is not directly exposed to direct sunlight or other heat sources;

3. There is no high concentration of dust and corrosive substances around the equipment;

4. There is no strong electromagnetic field around the equipment;

5. No flammable, explosive, corrosive substances and dust around the equipment;

6, no strong vibration around the device;

7, atmospheric pressure: a standard atmospheric pressure (standard atmospheric pressure is 101.325kPa).

Second, the environmental requirements

1, the ambient temperature: 5 °C ~ +30 °C (average temperature within 24 hours ≤ 30 °C)

2, the environmental humidity: ≤ 85% RH

Third, the load conditions

1. Prohibition of testing flammable and explosive materials;

2. Prohibit testing with severely corrosive and polluting articles.

Fourth, pay attention to matters

1. Please confirm the connection of the power supply before running the constant temperature and humidity test box;

2. Please note that this machine must be safely grounded to avoid static induction;

3. Avoid turning off and restarting the refrigeration unit within fifteen minutes;

4, water conditions: the use of pure water, distilled water, deionized water. Resistivity ≥ 500Ω.m

5, lights except when necessary to open, the rest of the time should be closed;

6, in the operation, unless it is absolutely necessary, please do not open the door;

7. After each test is completed, the power source, gas source, and water source should be cut off to prevent the device from being in a live standby state for a long time.

    What is Feeder on the placement machine? What is Feida on the placement machine? Feida is the main accessory of the placement machine. Its function is to mount the SMD patch components on the feeder, and the feeder provides components for the placement machine for patching.

    In the placement machine, the feeder functions to supply the chip component SMC/SMD to the placement head in a regular pattern and order for accurate and convenient pickup, which occupies a large number and position in the placement machine. It is also an important part of choosing a placement machine and arranging the placement process. Depending on the SMC/SMD package, feeders typically have a variety of tapes, sticks, waffles, and bulk materials.

    Tape feeders with the different size such as 8mm, 16mm, 24mm, 32mm, 44mm, 56mm etc.

Panasonic Feeder

Panasonic Feeder,Insertion Machine Tape Feeder Unit,Tape Feeder Unit,Feeder Panasonic

Shenzhen Keith Electronic Equipment Co., Ltd. , https://www.aismtks.com