Chicago 2-11 Alarm 9-11-11

Chicago experienced a commercial fire on Sunday morning at 5614 W. Grand Avenue, capturing the attention of local photographers and firefighters alike. Steve Redick and Dan McInerney were on the scene and captured several powerful images that highlight the intensity of the blaze. An embedded video (currently unavailable) provides a visual perspective of the event, while a series of photographs offer a closer look at the unfolding situation. One image shows heavy flames engulfing an auto body shop, with Steve Redick noting that the fire had already spread through the roof before he arrived. Another photo captures firefighters using deluge guns from the street level in a defensive firefighting effort. Steve shared some detailed observations about the incident, describing how the 2-11 alarm was called around 6:00 AM. He noted that the building was a single-story commercial structure attached to a truss-roof auto repair garage. Upon arrival, he saw that Squad 2 lacked a snorkel, and both tower ladders (14 and 23) were out of service. The fire quickly became severe, leading to two separate roof collapses during his time on site. Though he didn’t capture them on camera, he observed that no major structural failures beyond the roof occurred. He also mentioned that Engine 43 used a ground ladder to reach the roof of an adjacent building for a vantage point. The timing of the fire coincided with a shift change, which explains the varied attire of the responding personnel. Steve included a link to a short video featuring radio traffic from the scene, adding another layer of insight into the operation. Additional photos show the scale of the response, including tower ladders, multiple hand lines, and multi-versals being deployed. Engine 68, the first due engine, was equipped with a deck gun and several flowing lines. Later in the incident, a significant amount of water was used to suppress the fire, as seen in one of Dan McInerney’s images. Dan provided further context, explaining that the structure was a single-story truss-roof auto body shop measuring approximately 75 by 100 feet. The fire spread throughout the building, with exposure in Sector 2 also affected. He described how Engine 117 and Tower 35 operated from the roof of the building to the west of the main structure, using their main lines to attack the fire from a strategic position. Other images show firefighters hoisting hoses up ladders to reach the roof, highlighting the challenging conditions they faced. A nearby two-story house to the west had multiple lines operating from both the roof and second-floor windows, showing the extent of the fire's impact. More video links, photo galleries, and additional images will be available in a follow-up article, offering a more comprehensive view of this complex and intense fire incident.

Spare Parts

1. Based on Plate Corrugation Patterns

1.1 Chevron Pattern Plates

  • Features: Fishbone-like corrugations creating turbulence for enhanced heat transfer.
  • Benefits: High thermal efficiency, widely applicable.
  • Applications: HVAC systems, chemical processing, food and beverage industries.

1.2 Horizontal Pattern Plates

  • Features: Parallel corrugations offering low-pressure drops.
  • Benefits: Reduced fluid resistance, suitable for low-viscosity fluids.
  • Applications: Cooling water systems, general heat transfer processes.

1.3 Dimpled Pattern Plates

  • Features: Raised dimpled surfaces to handle viscous or particle-laden fluids.
  • Benefits: Reduced clogging, withstands high pressure.
  • Applications: Pulp and paper industries, petroleum refineries.

2. Based on Plate Purpose

2.1 Standard Plates

Designed for general-purpose use, balancing heat transfer and pressure resistance.

2.2 High-Pressure Plates

Thicker plates built for systems handling high-pressure fluids, like steam or oil.

2.3 Double-Wall Plates

Double-layered plates prevent cross-contamination, ideal for sensitive industries like food processing or pharmaceuticals.

2.4 Semi-Welded Plates

Partially welded to handle corrosive fluids or gases in industrial applications.

3. Based on Plate Material

3.1 Stainless Steel Plates

  • Corrosion-resistant and durable, ideal for water treatment, food, and pharmaceutical applications.

3.2 Titanium Plates

  • Suitable for highly corrosive environments, such as seawater cooling or chemical processing.

3.3 Hastelloy Plates

  • Exceptional resistance to harsh chemicals, perfect for extreme conditions.

3.4 Copper or Nickel Alloy Plates

  • Excellent thermal conductivity, commonly used in marine applications and high-efficiency systems.

4. Based on Plate Design Characteristics

4.1 Short Flow Plates

Engineered for systems with uneven flow distribution, balancing efficiency on both sides.

4.2 Long Flow Plates

Designed for high flow rates with minimal pressure drops.

4.3 Symmetrical Plates

Ideal for applications with balanced flow rates on both sides of the heat exchanger.

4.4 Asymmetrical Plates

Specially crafted for scenarios where one side has a significantly lower flow rate.

Conclusion

Selecting the right type of plate for a Plate Heat Exchanger is critical for optimizing performance, efficiency, and longevity. Each plate type is tailored to specific needs, from handling high-pressure fluids to resisting corrosive environments, ensuring reliable operation in diverse applications.

spare parts, replacement parts, machinery parts, industrial spare parts, OEM spare parts

Siping Juyuan Hanyang Plate Heat Exchanger Co., Ltd , https://www.tj-heatexchange.com