First, if the impact crusher (reverse blow) bearing heat is found:
Explain that the bearing is short of oil, need to refuel in time, of course, too much oil will make the bearing heat, when you refuel, you must check the oil level, the bearing is damaged, the bearing should be replaced in time, the upper cover is too tight, the bolt should be adjusted, the tightness is appropriate.
Second, if the broken counterattack crusher (reverse blow) vibration is found:
Note that the material is too large, you can check the feed size. Uneven wear, indicating that the counter-attack hammer needs to be replaced, the rotor is unbalanced, needs to be adjusted, and the foundation is not properly handled. The anchor bolts need to be inspected and reinforced.
Third, such as the current impact crusher (reverse blow) belt flip:
Explain that the belt is worn and the V-belt needs to be replaced. Because of the problem of belt transmission and assembly, the pulley should be adjusted on the same plane. Be sure to pay attention to the quality of the V-belt itself.
Fourth, if the counter-crusher (reverse blow) is found to have excessive particle size:
Explain that the hammer head wears out, the hammer head needs to be idle or replaced, the gap between the hammer head and the counterattack plate is too large, generally adjusted to 15-20mm, and the excessive feed size will also affect the discharge granularity.
The reinforcement net have a wide scope of application as reinforce the production of industrial farics, mixed laminar , plasticand / or paper composites and for the structural sppport of polyurethane seats for cars, trains and planes, bed mattress, water filter and air filter.
The Plastic Net is made of Polyethylene (PE), polypropylene (PP), has the clear advantage of being ladder-proof and maintain high dimensional stability throughout the extruded bioriented production process.
woven reinforcement net, plastic reinforcement net , Reinforcement Mesh, Anti-Crack Reinforcement Mesh
Hebei TongChan Imp.&Exp.Co., Ltd. , https://www.tongchanmesh.com