Chongqing Science and Technology Development Co., Ltd. has developed a new type of slide-type control valve in China

[China Instrument Network Instrument R&D] A few days ago, Chongqing University of Technology, jointly with Chongqing Chuanwu Instrument Co., Ltd. and other units, jointly developed a new type of sliding plate type control valve “X7020 4” Class 300. At present, the product has been promoted in China. And successfully exported abroad.

During the development process, the R&D team performed a three-dimensional steady-state steady-state numerical simulation of the internal flow state of the slide-type regulator valve at different opening degrees, analyzed the internal pressure, velocity, and flow line distribution of the valve, and obtained the flow characteristics of the valve. The flow resistance characteristics and the influence of different structural parameters of the throttle slot of the sliding plate type control valve on the flow characteristics of the valve realize the optimal design of the valve structure.
The “X7020 4” Class 300”, a sliding-type control valve developed by the company, has the advantages of compact structure, short stroke, fast operation speed, and avoidance of particulate medium erosion, etc. It can be used in combination with solenoid valves and other pneumatic components to achieve the cut-off function. Can also be widely used in petroleum, chemical and other industries of the automatic control system, suitable for high precision gas, liquid and steam process media.
According to the relevant person in charge of Chongqing University of Technology, the product R&D was completed under the funding of the “Chongqing City Application Development Plan” project. Currently, the product has been promoted in China and has been exported to Iran’s national oil company, achieving a good economy. Benefits and social benefits.
(Original title: Chongqing University of Technology successfully developed a new type of sliding-type valve has been exported abroad)

Product Parameters
Pneumatic Driven Fan Bar Plate(plate-fin) Heat Exchanger Series

Features: 
Aluminum bar plate fin structure, coupled with high-performance air pump motor and high-strength fan leaves, in the complex working conditions for a long time to work.

Application: 
air compressor gas cooling.

Technical Parameters:
The displacement of the motor in the table is for reference only and can be adjusted according to the actual working conditions and requirements.
Motor in and out of the oil is bidirectional, the standard configuration for the suction type.
Maximum operating pressure: 100psi Best use pressure: 70psi Applicable temperature: -10 ℃ ~ 70 ℃

The noise value is a value at a distance of 1 m.

Independent Oil Pump AC Axial Fan Heat Exchanger

Oil Pump Ac Fan Cooling System

Oil Pump Ac Fan Cooling System,Ac Fan Cooling System,Air Conditioner Cooling Fan,Aluminum Hydraulic Oil Cooler

Xinxiang Zhenhua Radiator Co., Ltd. , https://www.thermictransfer.nl