Performance characteristics and technical parameters of blue base rod mill

Blue Base Rod Mill Overview

The rod mill is loaded by barrel grinding bodies is named after the bar, rod mill is generally wet overflow type, it can be used as an open-circuit grinding, widely used in artificial stone sand, mineral processing plants, chemical First-grade grinding in the power sector of the plant. The particle size characteristics of the rod mill product are related to the condition of the rod milled ore. When the rod hits the ore, the first is to grind the coarse particles, and then the smaller ore particles are ground, thus reducing the risk of over-grinding. When the rods are turned up along the lining, the coarse particles are sandwiched between them, as if the rods are sieved, so that the fine particles pass between the slits of the rods, which is also advantageous for crushing the coarse particles and for concentrating the coarse particles in the grinding medium. The place to fight. Therefore, the product of the rod mill is relatively uniform and the pulverization is lighter.

Rod mills are available in dry rod mills and wet rod mills. Users can choose according to their actual situation. For the processing of quartz sand, dolomite, monazite and other products, the mill can be equipped with a magnetic separator to remove iron .

Blue base rod mill performance characteristics

The blue-based rod mill is available in both dry and wet versions, and users can choose according to their actual situation.

The blue base rod mill adopts advanced controllable feeding and discharging technology. The actual grinding material should be matched with the appropriate grinding body to change the traditional surface contact to line contact, so that the discharge granularity is more uniform, the output is higher, and the price reasonable, widely used in refractory, chemical industry, metallurgy and glass industries on the ground after high uniformity requirements finished grinding operation, in recent years, also for building sand sand industries.

The blue-based machine is characterized in that the grinding medium is in line contact with the ore during the grinding process, and thus has a certain selective grinding effect. The product has a relatively uniform particle size and less pulverized ore particles. When used for rough grinding, the rod mill is processed in a larger amount than a ball mill of the same specification. vice versa.

When the rod mill is working: the motor is driven by the reducer and the surrounding large gear reduction drive or by the low speed synchronous motor directly through the peripheral large gear reduction drive to drive the cylinder to rotate. The cylinder is filled with a suitable grinding medium - steel rod. Under the action of centrifugal force and friction force, the grinding medium is lifted to a certain height and falls down in a falling or falling state. The material to be milled continuously enters the inside of the cylinder by the feeding port, is crushed by the moving grinding medium, and discharges the product out of the machine through the overflow and continuous feeding force to carry out the next process operation.

Blue base rod mill technical parameter map

Introduction of the machine:

automatic gluer consist of three part which is feeding paper part,glue folding part and counting piling part,adjust the speed by digital,micro-adjust the phase by computer,with simple quick reliable and precise controlling style,automatic feeding paper,automatic gluing and folding,automatic counting ,automatic pilling and outputting,average sticking speed is 150pcs/imn,max speed is 220pcs/imn.High efficiency,save energy,enviromental is our top pursuit.

Fuction and characteristic:

Automatically finish the top folding and middle folding,meanwhile finish the glue belt stickof the upper and down part,save albor and time.

suitable range is wide,can be used in different size of carton,puicd and convenient to adjust.

The machine work steadly and reliable,the effect is firm and good looking.

Easy to operate and easy to maintain

Automatic amend the carton right-angle degree.

Folding part

The first folding line is 180 degree,the third folding line is 135 degree

Automatic amending part:

amending the fish tail scissors error ect. effectively.

Counting and piling part:

The finished product can be counted and speed-changing etc.automatically,pile neatly,exactly output .The speed can be adjusted,can be controlled seperately,the piling speed is 130m/min.

Counting and piling part:

The finished product can be counted and speed-changing etc.automatically,pile neatly,exactly output .The speed can be adjusted,can be controlled seperately,the piling speed is 130m/min.


Full Automatic Carton Folder Gluer Machine

Folder Gluer,Full Automatic Carton Folder Gluer Machine,Automatic Folder Gluer,Folder Gluer Carton Machine

JIALONG PACKAGING MACHINERY CO.,LTD , https://www.jlcartonmachine.com