Ultrasonic flowmeter selection considerations, how to choose ultrasonic flowmeter

ZRN-100 Series Ultrasonic Flowmeter Selection
1. ZRN-100B insertion type ultrasonic flowmeter : special drilling device can be installed without stopping production. It is generally a mono measurement. To improve the measurement accuracy, three channels can be selected.
2. ZRN-100 Ultrasonic Flowmeter for Pipe Segments: It is necessary to cut the pipeline installation, but the maintenance can be stopped afterwards. Mono or three-channel sensors are available.
3, ZRN-100F clip-on ultrasonic flowmeter : able to complete the fixed and mobile measurements. Use a special coupling agent (room-cured silicone rubber or high-temperature long-chain polymeric grease) for installation and do not damage the piping during installation.
4, ZRN-100P portable ultrasonic flowmeter: portable use, built-in rechargeable lithium battery, suitable for mobile measurement, with magnetic sensors.
5, ZRN-100H handheld ultrasonic flowmeter: small size, light weight, built-in rechargeable lithium battery, hand-held use, with a magnetic sensor.
6. ZRN-100FN explosion-proof ultrasonic flowmeter: It is used for explosion-proof and intrinsically safe liquid flow measurement in explosive environment. That is, the converter is explosion-proof and the sensor is intrinsically safe.
7. Flow measurement system: It consists of multiple ultrasonic flow meters and system master station. Suitable for centralized measurement of multiple lines.
8. Ultrasonic calorimeter: Used for calorie measurement of heating system.
9, battery-powered ultrasonic flowmeter: An integrated lithium battery-powered ultrasonic flowmeter. Suitable for occasions without mains supply, a battery can be used for ten years, with a variety of measurement functions.
The segment-type ultrasonic flowmeter integrates the transducer and the measuring tube, and solves a problem in the measurement of the external-mounted flowmeter. Moreover, the measurement accuracy is also higher than other ultrasonic flowmeters, but at the same time, it also sacrifices the advantages of continuous flow installation of external-mount ultrasonic flowmeters, and requires that the pipeline is installed with a transducer.
(3) Plug-in
The plug-in ultrasonic flow meter is intermediate between the two. In the installation can be continuous flow, the use of special tools in the water pipe drilling, the transducer is inserted into the pipe to complete the installation. Because the transducer is in the pipeline, its signal is transmitted and received only through the measured medium without passing through the pipe wall and the lining, so the measurement is not limited by the pipe quality and the pipe lining material.

Thermoelectric industry (ultrasonic flowmeter part customers):

Datang Gaojing Thermal Power Plant, Beijing No. 2 Thermal Power Plant, Beijing Keliyuan Thermal Power Plant, Beijing Yulin Heating Plant, Shanxi No. 2 Thermal Power Plant, Shanxi Lingshi Heating, Shanxi Tianshi Power, Changxin High-voltage Power Plant, Qinshan Nuclear Power Plant, Yingkou Huaneng Power, Erdos Power Plant, Yanjiao Thermal Power Plant, Shangri-La Power Plant, Changchun Lanchuan Power Plant