On January 26, Reuters made the above report and was widely reprinted on the Internet.
According to previous media reports, the environmental tax plan formulated by the Ministry of Finance, the State Administration of Taxation and the Ministry of Environmental Protection has taken shape and is positioned as an "independent environmental tax," ie, a new type of tax. The scope of lock-in is three pollutants including carbon dioxide, waste water and solid waste, and carbon dioxide.
Due to the complexity of the environmental tax system and the large number of ministries involved, the program has not yet reached consensus on the details of the policy.
According to Reuters, Li Shousheng, executive vice president of the China Petroleum and Chemical Industry Federation, said yesterday that the domestic petrochemical industry is facing new conditions such as overcapacity, increased inflationary pressures, and energy-saving emission reductions.
"(The petrochemical industry) plans for the first eleven five years have been formulated under the condition of "shortage," and the "12th Five-Year Plan" has been formulated in the context of overall overcapacity." He added that although the overall production capacity is in excess However, some products also have insufficient capacity.
The “Twelfth Five-Year Plan†of the petrochemical industry is mainly prepared by the China Petroleum and Chemical Industry Federation. Li Shousheng disclosed that the preparation of the “Twelfth Five-Year Plan†for the petrochemical industry is drawing to a close, and that a closed-door meeting will be held after the Spring Festival for final revision. This will be formally announced in April this year.
"The new material will be developed as a key point," said Li Shousheng.
Li Shousheng also said that due to the global economy is still in the recovery phase, the trade friction in the petrochemical industry in 2011 will be even more.
According to statistics, from January to October 2010, there were 7 new cases of foreign trade protection of Chinese chemical products, including 5 anti-dumping cases and 2 general protective measures. The amount involved was 200 million U.S. dollars.
Installation and precautions of track connecting rod oil seal
The installation steps for the track link oil seal are as follows:
1. Cleaning: Clean the connecting parts to ensure that the surface is flat, clean, and free of grease and dirt.
2. Oil application: Apply a layer of lubricating oil to the connecting parts for better installation.
3. Installation: Gently push the oil seal into the connection area to ensure that the lip of the oil seal is not damaged.
4. Positioning: After positioning the oil seal, press it with your fingers to ensure it is in the correct position.
5. Inspection: Check if the oil seal is installed correctly and ensure that the lip is not damaged.
The precautions are as follows:
Before installation, check if the oil seal is damaged. If the oil seal is damaged, replace it with a new one.
Before installation, ensure that the surface of the connecting parts is flat, clean, and free of grease and dirt.
3. When installing the oil seal, gently push in to avoid damaging the lip of the oil seal.
4. After installation, check whether the oil seal is installed correctly to ensure that the lip is not damaged.
5. During use, the condition of the oil seal should be regularly checked. If any damage or wear is found, the oil seal should be replaced in a timely manner.
Wear ring for excavator,For excavator track,For excavator accessories
Safe Seal Technology Co., Ltd. , https://www.sprsealkits.com