Pay special attention to the following when working with the roller crusher :
(1) It is necessary to strengthen the iron removal work for the mine. If the non-crushed material (such as a bit) falls into the pair of rollers, the crusher will be damaged, resulting in a parking accident. Therefore, a de-ironing device should be installed in front of the crusher.
(2) The viscous material is easy to block the crushing space. It should be stopped when handling the clogging failure, and the bismuth ore should not be carried out during operation.
(3) When the material to be processed contains more large pieces, it should be noted that large ore is easily squeezed out from the crushing space to prevent injury or damage to the equipment.
(4) After the roller crusher is operated for a long time, due to the large wear of the roller surface, the product size will be too fine. At this time, it is necessary to pay attention to adjusting the discharge port or repairing the equipment.
(5) Strengthen the inspection of the equipment, and refuel the equipment on the lubrication parts to keep the equipment in good lubrication.
Aluminum brazing sheet is one of Trumony strong product.Brazing sheet is a special technology which we use hot rolling technology to roll different layer of aluminum together.Such as 4343/3003/4343 or 4045/3003/4045 or 4343/3003/7072.Outside layer 4343 will be melt under lower degree than 3003.So through brazing furnace,outside layer of 4343 will melt and 3003 can be welded together with attached material.
While 7072 is corrosion resistant purpose for longer shelf life of the Aluminum Sheet.
Using of the aluminum brazing sheet is saving the adhesive reagent which is now using more and more in different industry.Trumony Aluminum Limited,your best choice of aluminum brazing sheet
Brazing Sheet,3003 Aluminum Sheet,Clad Aluminum Sheet,Aluminium Brazing Sheet
Trumony Aluminum Limited , https://www.trumonyalu.com