Not long ago, the incident involving Land Rover's Range Rover explosion has been buzzing. At the end of last month, a Land Rover Range Rover exploded in Sanhe, Hebei. On-site surveillance video was also circulated online. However, on the 16th, the police in Hebei Sanhe issued investigation results, saying that the explosion was caused by a flat tire and no suspicious attachment was found on the vehicle. Or smoke traces. For the time being, we will not say whether the investigation results are tenable. The accident of light bursting is not a small security risk for a pickup truck owner, and sometimes it is related to his own life safety. Therefore, how to troubleshoot the tire puncture problem in advance? It's a common sense that every pickup truck owner should know. Below Pickup China.com gave everyone a general knowledge of pickup truck tire maintenance.
1, often check the tire's wear
Occasionally, individual vehicles will experience "gestures", which requires checking the tires frequently, especially on the inside, to see if there is abnormal wear. The main observation is whether the depth of the treads on both sides of the tire is the same.
2, check the tire pressure is within the standard value
Prepare a barometer, or some cars are equipped with the tire pressure monitoring function, and from time to time focus on whether the tire pressure is within the standard value. The standard air pressure for each car tire may be slightly different. You can find this parameter in the corresponding location of the pickup truck specification. If the measured air pressure is different from the standard value, you must look at the situation and perform replenishment and deflation in a timely manner.
3, observe the tire lines
Always pay attention to the tire pattern has no serious wear, if the groove of the tire tread path is already very shallow, then this tire is not far from the end of life, and it should be replaced with a new tire.
4, on time tires
The front wheel of the vehicle is a steering wheel, and the wear is relatively large. Generally, in order to reduce the wear of the money wheel, after the first insurance, the vehicle performs a four-round replacement every 5000 kilometers, and it is preferable to replace the diagonal line.
5, regular four-wheel positioning
When the vehicle has a deviation or other abnormal steering, the tire must be positioned in time to avoid other abnormalities. Four-wheel positioning can ensure that the four tires of the vehicle are evenly stressed and avoid excessive wear.
6, timely repair
If the car has a nail, even if there is no air leakage, it should be replaced with a spare tire as soon as possible, and then make up the tire to tie the nail. Xiao Bian has had experience. In fact, sometimes it is not necessary to change the spare tire before putting on a nail. If the nail is not large and the tie is not deep, it may not be enough to change the tire, and it is not necessary to change the spare tire.
These are the ways to prevent flat tires. However, if you find out before you go out and four tires have signs of flat tires or tire punctures, then it is recommended that all pickup truck owners do not drive pickup trucks. If there is a puncture on the road, the first thing to do is not to panic to calm down, to take full braking to protect passengers and their own safety as much as possible to use the slowest parking, and the first time to call the police and rescue calls.
Construction Steel Wire,Prestresssed Steel Wire,Prestressed Cold Drawn Wire,Prestressed Spiral Steel Wire
Shandong Xindadi Holding Group Co., Ltd , https://www.xindadipcwire.com