When the valve is assembled, the degree and sequence of bolt tightening has a direct effect on the quality of its assembly. Tighten the bolts for the general easier to handle, the connector is not loose on it. However, the gasket, packing structure of the bolt tightening, there should be prior, symmetrical, turns Tightening. When each bolt is tightened, check whether the flange is skewed and measure the gap between the flanges for correctness. Tighten the bolts symmetrically in turn, and tighten to a small amount of 1 / 4-1 / 2 turns until the required preload force is reached. Pay special attention not to over-tighten, so as not to crush the gasket, the general twist to leak does not prevail. Finally check the flange clearance, the gap should be consistent and maintained at 2mm above. This keyword search: More Valve products supply information
Inflatable Toys High Frequency Welding Machine
Inflatable Toys High Frequency Welding Machine is a high frequency device, whose self-exited oscillator of the electron tube can produce high frequency electromagnetic field. And the plastic to be processed is in the high frequency electromagnetic field between the upper and low electrode. When its interior molecules are polarized and produce heat automatically by mutual movement and friction, it will be welded with the pressure of the die.
Mattress Making Machine,Inflatable Toys High Frequency Welding Machine,Pvc Air Mattress Making Machine,Life Jacket Making Machine
Hangzhou Xiaoshan Wanfeng Mechanical & Electrical Equipment Factory , https://www.wfengmachinery.com