Car Seat Headrest Plastic Hook for Coat bottles bags

 

Premium Material - Made from Eco-friendly PP material, great toughness, resistant to heat and cold environment,Strong and durable,would not crack or break easily. Easily hold up to 10 kg)/per hook,deal with most of your belongings in your car. Fits many model vehicle with headrest extension bars.

Keep Your Car Organized - Converts your car's headrest into a convenient storage space to hang groceries, handbags, grocery bags,purses, schoolbags, umbrellas,water bottles, shopping bags,kid's toys, baby supplies and much more.No more leaving your house or store with shopping bags and placing it on the floor or seat rolling around and spilling.

Easy Installation - Special half open design allows you to install these hooks easily, no need to take off the headrests, you can freely set or remove the hooks in secs without extra tools,also the hook can easily swing around the front or back of the seat,V-shaped hook design to make one hook can hange 2 grocery bags or other stuffs,quick and convenient.

Universal Headrest Hook - Sold by 2 pack,can be used in anywhere you want. Fits Most of Car Seat.

 

 

SAMPLE
1)      Samples can be made upon your requirement, send us your details with picture or samples.
2)      Free sample are offered based on your order quantity. And sample fee will be returned after order confirmed
3)      If we have samples in stock, usually we supply some free samples if you have a FedEx, DHL,TNT freight collectable account and agree to pay the courier freight
4)      Every time we can ship our newest design cases together with your places order.
 
PAYMENT
1)      Payment terms: Bank Transfer(T/T), Western Union, Money Gram, and PayPal
2)      30% in advance balance before shipment. If it is only small payment, please transfer full payment
3)      In order to short the delivery time, pls fax or email us a wire transfer copy once you settle the payment. 
 
SHIPPING
1)      Usual order: Express by DHL/UPS/FedEx/TNT/EMS etc    Large order: By sea or by air
2)      Delivery time Required; freight payment(by collected or prepare)
3)      If you have your own forwarder, please let us know their contact details
4)      Shipping information: Contact name, Company name, Detailed address, Phone number.

OUR SERVICE
 Akita at dotely net
Call:86 15826516030

Alfa Laval Heat Exchanger

Double-Wall Plate Heat ExchangerGasketed plate heat exchangers (PHE) meets almost all of heat transfer requirements. They are highly flexible with a wide range of models. Connection sizes range from 1″ to 16″. Plate materials are available in a wide variety such as stainless steel 316, 304 and titanium. Other alloys for corrosive applications such as Hastelloy, Nickel and monel are also available.

A flat Plate Heat Exchanger transfers heat between two different fluids using metal plates to separate the fluids. The fluids move between the gaps in the plates. The plates are corrugated in a chevron pattern causing high turbulence in the fluids. The high turbulence and high surface area of the plates results in a higher efficiency of heat transfer than conventional shell and tube heat exchangers.

Advantages of Plate Heat Exchangers:

Because the flow pattern causes high turbulence of the fluids through alternate channels – this results in a higher heat transfer rate allowing for a more compact design reducing material cost since the heat transfer surface requirement is much lower than a conventional heat exchanger.
High turbulence results in less fouling – therefore less down time for maintenance.
Easily add capacity as expansion is required by adding plates to the heat exchanger.
Can be opened without disturbing the piping.
Closer temperature approaches of up to 2°F maximizes heat recovery for a wide variety of applications.
Minimal space required for opening or closing the heat exchanger allows for easy maintenance.
Ideal for mounting on a skid.
Flow principle of Plate And Frame Heat Exchangers:

Plate and frame heat exchangers consists of a pack of thin metal plates with openings for the passage of the fluids. The plates are corrugated which means that each pair of adjacent plates in the heat exchanger forms a channel. Every second channel is open to the same fluid. Between each pair of plates there is a rubber gasket, which prevents the fluids from mixing and from leaking to the surroundings.

When the media enters the Plate And Frame Heat Exchanger via the connections in the frame, it`s directed through alternate channels by the gasket arrangement. The warm fluid flows through every other channel and the cold fluid through the channels in between. Heat is thus transferred from the warm fluid to the colder fluid via the dividing wall, i.e. the plate material. The corrugations support the plates against differential pressure and create a turbulent flow in the channels. In turn, the turbulent flow provides high heat transfer efficiency, making the plate heat exchanger very compact compared with the traditional shell-and-tube heat exchanger.

The Double-Wall Plate Heat Exchanger:

For fluids that must be kept separate

The Double-Wall Plate Heat Exchanger  is a technical breakthrough for heat exchange for media between which a hostile or undesirable reaction can occur, if the two fluids should mix. The Double-Wall Plate Heat Exchanger is therefore a new alternative to traditional heat transfer equipment such as the double-wall shell-and-tube heat exchanger, the triple-tube shell-and-tube heat exchanger, the double-circuit intercooler, and coils for indirect heating.

ALFA LAVAL Plate Heat Exchanger

Alfa Laval Plate,0.5Mm Plate For Heat Exchanger,Heat Exchanger 0.5Mm Hastelloy Plate,High-Theta Plate For Heat Exchanger

Liaoning LotusNine International Trade co.,ltd , https://www.lj-heatexchangers.com