IGBT High Frequency Tool Welding Machine with Industrial Chiller

IGBT High Frequency Tool Welding Machine with Industrial Chiller 

Technical Parameters:

Kechuang High frequency  induction welding machine  Features:
(1) Fast heating, uniform, which can effectively prevent zigzag caused by local overheating embrittlement and fracture, but also can prevent lack of penetration cause off tooth and other bad phenomenon;
(2) Suitable for welding high performance, high hardness serrated saw blade.
(3) Provide welding arts, installation simple and useful convenience.
(4) Compared to thyristor medium frequency furnace, save energy 10-30%.
(5)Can complete minimum and maximum head welding, all kinds of power, frequency for your selection.



Kechuang high frequency  induction welding machine  transformer:
1.Technical parameters:
1.1. Capacity range: 300KVA--3000KVA
1.2. Frequency range: 0.1KHz--500KHz
2.Features:
General Transformer----convenient operation, single turn ratio, need to adjust the induction coil to match the machine.
Multi-ratio Transformer----suitable for all kinds of induction coils, used for all kinds of occasion, just need to adjust the turn ratio is ok.
Coaxial Transformer---energy concentration, small volume, but the turn ratio is single, better suitable for fixed load.




High Frequency induction  induction welding machine  Coil:
1.Technical parameters:
    made by the customers' detailed technical requirement.

2.Features:
Ø  Magnetic field distribution and design are precise, high efficient and energy-saving.
Ø  Use with the magnetizer, easy to adjust the magnetic field intensity.
Ø  Easy disassembly, exchangeability.
Ø  Fastness and durability.
 
3.Induction coil applications:
   Crankshaft induction coil, end-face induction coil, hub bearing induction coil, caterpillar track section hardening induction coil, inner hold induction coil, gear induction coil, shaft neck hardening induction coil, 3m inner hold hardening induction coil, crankshaft with fillet induction coil.
 
4.Induction coil pictures:






Cooling water device:
1.Technique data
Input voltage;three phase 380V±10%
Rated voltage: three phase 380V  50Hz
Cooling capacity:31100Kcal/h-1806000Kcal/h
2. Feature:
Cooling water tower movement all adopt in thermal efficiency high copper tube, let the working fluid (water or other liquid) in its line through, through the fan and air for natural heat exchange, one-time finish. It is not only energy conservation and environmental protection,but also tube is clean and unobstructed, reduce the failure rate, prolong the useful life of the equipment. Closed circulating cooling reduce pipe corrosion and scaling, do not need to pool, covers an area of small, convenient to move, energy saving, simple operation.



Customer service:
Call or e-mail us any time. Before you place your order, we will be happy to discuss your detailed requirements with you and help you find a selection of machine that is just right for your market.
 

 Quick Delivery:
With your wide requested of faucets with even less than our MOQ, we are able to fulfill most requests within short days of your order.
 

 Promise :
Customers Satisfaction, provide good quality and reasonable price and constant after sale service to be engaged in 100% of us .Our Warranty period is one year.
 

 High Frequency  induction welding machine  Selection :
You can just let us know the type, power, frequency, quenching ways, quenching hardness ,depth and materials, choosing proper frequency according to production efficiency. According to specific workpiece shape, material, welding material and so on to decide. choosing according to smelter furnace and production efficiency, choosing according to product speed, materials, temperatures and so on. If is the axial, please tell us the diameter of the axial? If you have drawings please send us. please contact us more specification.










     IGBT High Frequency Tool Welding Machine with Industrial Chiller 

Technical Parameters:

Kechuang High frequency  induction welding machine  Features:
(1) Fast heating, uniform, which can effectively prevent zigzag caused by local overheating embrittlement and fracture, but also can prevent lack of penetration cause off tooth and other bad phenomenon;
(2) Suitable for welding high performance, high hardness serrated saw blade.
(3) Provide welding arts, installation simple and useful convenience.
(4) Compared to thyristor medium frequency furnace, save energy 10-30%.
(5)Can complete minimum and maximum head welding, all kinds of power, frequency for your selection.



Kechuang high frequency  induction welding machine  transformer:
1.Technical parameters:
1.1. Capacity range: 300KVA--3000KVA
1.2. Frequency range: 0.1KHz--500KHz
2.Features:
General Transformer----convenient operation, single turn ratio, need to adjust the induction coil to match the machine.
Multi-ratio Transformer----suitable for all kinds of induction coils, used for all kinds of occasion, just need to adjust the turn ratio is ok.
Coaxial Transformer---energy concentration, small volume, but the turn ratio is single, better suitable for fixed load.




High Frequency induction  induction welding machine  Coil:
1.Technical parameters:
    made by the customers' detailed technical requirement.

2.Features:
Ø  Magnetic field distribution and design are precise, high efficient and energy-saving.
Ø  Use with the magnetizer, easy to adjust the magnetic field intensity.
Ø  Easy disassembly, exchangeability.
Ø  Fastness and durability.
 
3.Induction coil applications:
   Crankshaft induction coil, end-face induction coil, hub bearing induction coil, caterpillar track section hardening induction coil, inner hold induction coil, gear induction coil, shaft neck hardening induction coil, 3m inner hold hardening induction coil, crankshaft with fillet induction coil.
 
4.Induction coil pictures:






Cooling water device:
1.Technique data
Input voltage;three phase 380V±10%
Rated voltage: three phase 380V  50Hz
Cooling capacity:31100Kcal/h-1806000Kcal/h
2. Feature:
Cooling water tower movement all adopt in thermal efficiency high copper tube, let the working fluid (water or other liquid) in its line through, through the fan and air for natural heat exchange, one-time finish. It is not only energy conservation and environmental protection,but also tube is clean and unobstructed, reduce the failure rate, prolong the useful life of the equipment. Closed circulating cooling reduce pipe corrosion and scaling, do not need to pool, covers an area of small, convenient to move, energy saving, simple operation.



Customer service:
Call or e-mail us any time. Before you place your order, we will be happy to discuss your detailed requirements with you and help you find a selection of machine that is just right for your market.
 

 Quick Delivery:
With your wide requested of faucets with even less than our MOQ, we are able to fulfill most requests within short days of your order.
 

 Promise :
Customers Satisfaction, provide good quality and reasonable price and constant after sale service to be engaged in 100% of us .Our Warranty period is one year.
 

 High Frequency  induction welding machine  Selection :
You can just let us know the type, power, frequency, quenching ways, quenching hardness ,depth and materials, choosing proper frequency according to production efficiency. According to specific workpiece shape, material, welding material and so on to decide. choosing according to smelter furnace and production efficiency, choosing according to product speed, materials, temperatures and so on. If is the axial, please tell us the diameter of the axial? If you have drawings please send us. please contact us more specification.










    

Glass Cutting Machine mainly used to cut glass, mainly include aumomatic and semi-automatic flat glass 

cutting machine, Laminated Glass Cutting Machine, super thin galss machine etc. It includes manual, 

semi-aumatic and cnc glass cutting table.

Model No.XTS-3826 type high precision double cutting semi auto laminating glass cutting machine is 

widely used in thick plate glass,  laminated glass from the line.

The equipment operation is convenient, reliable, stable operation, the cutting efficiency and high precision.

Glass Cutting Machine

Glass Cutting Machine,CNC Glass Cutting Machine,Laminated Glass Cutting Machine,Automatic Glass Cutting Machine

Jinan XingTian Sunshine CNC Machine Co.,Ltd , https://www.cncplate.de