Double screw mixer is convection mixer of high efficiency.It has characteristic of gentle, high accuracy mixing and no damage to product.Two screws suspended from a turning arm, with different rotation semi diameter and different length, make three-dimensional action;Meantime, two screws make self rotation.
Helix cone mixer application:
1.Applicable material proportion of the poor, the powder particles are relatively large materials;
2.Suitable for ceramic glaze mixing gentle process, the material particles do not pressure-fed or broken;
3.The heat-sensitive materials will not overheat;
4.In the powder - powder mixing process is very easy to add working conditions or providing a liquid to a plurality of spray outlet means;
5.The bottom valve of dislocation convenient material, since the bottom of the spiral no fixtures, so there is no pressure fed phenomenon
Features:
1.Homogeneous mixing
2.Short mixing time 5-15 minutes
3.Clean discharge &Â no leftover
4.Central discharge valve:
Electronic, pneumatic, manual (optional)
Ball valve, flap valve, knife gate valve, butterfly valve (optional)
5.Main shaft seal:Stuffing seal and air purge seal
6.Drive:Siemens motor, cycloid or gear reducer
7.Limit/safety switch (optional)
8.Heating/cooling jacket optional)
CMPN Series Technical specifications:
Mixer Model |
Working volume (L) |
Rotation speed (rpm) |
Motor Power (kw) |
Overall Dimension (mm) |
Machine Weight (kg) |
CMPN-50 | 20-30 | 2&108 | 0.75 | Φ600×H1200 | 120 |
CMPN-100 | 40-60 | 2&108 | 1.1 | Φ700×H1500 | 200 |
CMPN-300 | 120-180 | 2&108 | 2.2 | Φ900×H2000 | 500 |
CMPN-500 | 200-300 | 2&108 | 3 | Φ1100×H2300 | 650 |
CMPN-1000 | 400-600 | 2&60 | 4 | Φ1600×H2700 | 1200 |
CMPN-2000 | 800-1200 | 2&60 | 5.5 | Φ1900×H3400 | 1550 |
CMPN-3000 | 1200-1800 | 2&60 | 7.5 | Φ2100×H3700 | 2200 |
CMPN-4000 | 1600-2400 | 2&60 | 11 | Φ2400×H4400 | 2500 |
CMPN-5000 | 2000-3000 | 2&60 | 15 | Φ2500×H4600 | 3100 |
CMPN-6000 | 2400-3600 | 2&60 | 15 | Φ2700×H4900 | 3600 |
CMPN-8000 | 3200-4800 | 2&60 | 18.5 | Φ2800×H5300 | 4100 |
CMPN-10000 | 4000-6000 | 2&60 | 22 | Φ3000×H5600 | 4500 |
CMPN-12000 | 4800-7200 | 2&60 | 22 | Φ3100×H6000 | 4800 |
CMPN-15000 | 6000-9000 | 2&60 | 30 | Φ3400×H6600 | 5100 |
CMPN-20000 | 8000-12000 | 2&60 | 45 | Φ3700×H7100 | 6200 |
CMPN-25000 | 10000-15000 | 2&60 | 55 | Φ3900×H7500 | 7300 |
CMPN-30000 | 12000-18000 | 2&60 | 75 | Φ4200×H8000 | 8500 |
DSH Series Technical specifications:
Mixer Model |
Design volume (L) |
Load factor | Working condition | Motor Power (kw) |
Dimension (mm) |
Machine Weight(Kg) | Mixing uniformity |
DSH-100 | 100 | 0.85 | ATM | 1.5 | Φ750×H1580 | 250 | ≥95% |
DSH-500 | 500 | 0.85 | ATM | 3 | Φ1150×H2320 | 600 | ≥95% |
DSH-1000 | 1000 | 0.85 | ATM | 5.5 | Φ1480×H2850 | 1200 | ≥95% |
DSH-2000 | 2000 | 0.85 | ATM | 5.5 | Φ1820×H3510 | 1500 | ≥95% |
DSH-3000 | 3000 | 0.85 | ATM | 7.5 | Φ2050×H3800 | 2300 | ≥95% |
DSH-4000 | 4000 | 0.85 | ATM | 11 | Φ2250×H4480 | 2500 | ≥95% |
DSH-5000 | 5000 | 0.85 | ATM | 15 | Φ2350×H4720 | 2800 | ≥95% |
DSH-6000 | 6000 | 0.85 | ATM | 15 | Φ2560×H4980 | 3000 | ≥95% |
DSH-8000 | 8000 | 0.85 | ATM | 18.5 | Φ2780×H5360 | 4500 | ≥95% |
DSH-10000 | 10000 | 0.85 | ATM | 18.5 | Φ3020×H5810 | 5500 | ≥95% |
DSH-15000 | 15000 | 0.85 | ATM | 22 | Φ3460×H6510 | 6800 | ≥95% |
DSH-20000 | 20000 | 0.85 | ATM | 37 | Φ3810×H7420 | 9800 | ≥95% |
DSH-25000 | 25000 | 0.85 | ATM | 45 | Φ4090×H7800 | 11000 | ≥95% |
DSH-30000 | 30000 | 0.85 | ATM | 55 | Φ4350×H8200 | 12500 | ≥95% |
Our Services
1.We are a direct manufacturer and our priority is your complete satisfaction.
2.Logo printing:We can print any logo as per your requires on the case.
3.We take care of each order from start to finish.All emails will be answered in 1Â day
4.No matter what's your order quantity, we will offer the same attention to our quality and service
5.Delivery &Â lead time:All delivery methods are ok, and our lead time is quite short.Usually, our lead time around 7Â days, depending on the quantity.
6.Packages:Available for ploy bag and carton box
About us
Guangzhou Li&Li Mechanical Equipment Co., Ltd.Is a manufacturer with 25 employees;It was established in 2004, located in No.3-301, Da Jian Section, South of Panyu Avenue, Guangchong Town, Nansha District, Guangzhou, Guangdong, China.The company occupy an area of more than 2300 square meters.Our main products include:Stainless Steel Tank, Mixing tanks,Reactor, Storage Tank, IBC Tank, Filling Machine, Conveyor Equipment, Vacuum Emulsifying Mixer, Liquid washing equipment ,ect. Double Screw Cone Type Mixer
Double screw mixer is convection mixer of high efficiency.It has characteristic of gentle, high accuracy mixing and no damage to product.Two screws suspended from a turning arm, with different rotation semi diameter and different length, make three-dimensional action;Meantime, two screws make self rotation.
Helix cone mixer application:
1.Applicable material proportion of the poor, the powder particles are relatively large materials;
2.Suitable for ceramic glaze mixing gentle process, the material particles do not pressure-fed or broken;
3.The heat-sensitive materials will not overheat;
4.In the powder - powder mixing process is very easy to add working conditions or providing a liquid to a plurality of spray outlet means;
5.The bottom valve of dislocation convenient material, since the bottom of the spiral no fixtures, so there is no pressure fed phenomenon
Features:
1.Homogeneous mixing
2.Short mixing time 5-15 minutes
3.Clean discharge &Â no leftover
4.Central discharge valve:
Electronic, pneumatic, manual (optional)
Ball valve, flap valve, knife gate valve, butterfly valve (optional)
5.Main shaft seal:Stuffing seal and air purge seal
6.Drive:Siemens motor, cycloid or gear reducer
7.Limit/safety switch (optional)
8.Heating/cooling jacket optional)
CMPN Series Technical specifications:
Mixer Model |
Working volume (L) |
Rotation speed (rpm) |
Motor Power (kw) |
Overall Dimension (mm) |
Machine Weight (kg) |
CMPN-50 | 20-30 | 2&108 | 0.75 | Φ600×H1200 | 120 |
CMPN-100 | 40-60 | 2&108 | 1.1 | Φ700×H1500 | 200 |
CMPN-300 | 120-180 | 2&108 | 2.2 | Φ900×H2000 | 500 |
CMPN-500 | 200-300 | 2&108 | 3 | Φ1100×H2300 | 650 |
CMPN-1000 | 400-600 | 2&60 | 4 | Φ1600×H2700 | 1200 |
CMPN-2000 | 800-1200 | 2&60 | 5.5 | Φ1900×H3400 | 1550 |
CMPN-3000 | 1200-1800 | 2&60 | 7.5 | Φ2100×H3700 | 2200 |
CMPN-4000 | 1600-2400 | 2&60 | 11 | Φ2400×H4400 | 2500 |
CMPN-5000 | 2000-3000 | 2&60 | 15 | Φ2500×H4600 | 3100 |
CMPN-6000 | 2400-3600 | 2&60 | 15 | Φ2700×H4900 | 3600 |
CMPN-8000 | 3200-4800 | 2&60 | 18.5 | Φ2800×H5300 | 4100 |
CMPN-10000 | 4000-6000 | 2&60 | 22 | Φ3000×H5600 | 4500 |
CMPN-12000 | 4800-7200 | 2&60 | 22 | Φ3100×H6000 | 4800 |
CMPN-15000 | 6000-9000 | 2&60 | 30 | Φ3400×H6600 | 5100 |
CMPN-20000 | 8000-12000 | 2&60 | 45 | Φ3700×H7100 | 6200 |
CMPN-25000 | 10000-15000 | 2&60 | 55 | Φ3900×H7500 | 7300 |
CMPN-30000 | 12000-18000 | 2&60 | 75 | Φ4200×H8000 | 8500 |
DSH Series Technical specifications:
Mixer Model |
Design volume (L) |
Load factor | Working condition | Motor Power (kw) |
Dimension (mm) |
Machine Weight(Kg) | Mixing uniformity |
DSH-100 | 100 | 0.85 | ATM | 1.5 | Φ750×H1580 | 250 | ≥95% |
DSH-500 | 500 | 0.85 | ATM | 3 | Φ1150×H2320 | 600 | ≥95% |
DSH-1000 | 1000 | 0.85 | ATM | 5.5 | Φ1480×H2850 | 1200 | ≥95% |
DSH-2000 | 2000 | 0.85 | ATM | 5.5 | Φ1820×H3510 | 1500 | ≥95% |
DSH-3000 | 3000 | 0.85 | ATM | 7.5 | Φ2050×H3800 | 2300 | ≥95% |
DSH-4000 | 4000 | 0.85 | ATM | 11 | Φ2250×H4480 | 2500 | ≥95% |
DSH-5000 | 5000 | 0.85 | ATM | 15 | Φ2350×H4720 | 2800 | ≥95% |
DSH-6000 | 6000 | 0.85 | ATM | 15 | Φ2560×H4980 | 3000 | ≥95% |
DSH-8000 | 8000 | 0.85 | ATM | 18.5 | Φ2780×H5360 | 4500 | ≥95% |
DSH-10000 | 10000 | 0.85 | ATM | 18.5 | Φ3020×H5810 | 5500 | ≥95% |
DSH-15000 | 15000 | 0.85 | ATM | 22 | Φ3460×H6510 | 6800 | ≥95% |
DSH-20000 | 20000 | 0.85 | ATM | 37 | Φ3810×H7420 | 9800 | ≥95% |
DSH-25000 | 25000 | 0.85 | ATM | 45 | Φ4090×H7800 | 11000 | ≥95% |
DSH-30000 | 30000 | 0.85 | ATM | 55 | Φ4350×H8200 | 12500 | ≥95% |
Our Services
1.We are a direct manufacturer and our priority is your complete satisfaction.
2.Logo printing:We can print any logo as per your requires on the case.
3.We take care of each order from start to finish.All emails will be answered in 1Â day
4.No matter what's your order quantity, we will offer the same attention to our quality and service
5.Delivery &Â lead time:All delivery methods are ok, and our lead time is quite short.Usually, our lead time around 7Â days, depending on the quantity.
6.Packages:Available for ploy bag and carton box
About us
Guangzhou Li&Li Mechanical Equipment Co., Ltd.Is a manufacturer with 25 employees;It was established in 2004, located in No.3-301, Da Jian Section, South of Panyu Avenue, Guangchong Town, Nansha District, Guangzhou, Guangdong, China.The company occupy an area of more than 2300 square meters.Our main products include:Stainless Steel Tank, Mixing tanks,Reactor, Storage Tank, IBC Tank, Filling Machine, Conveyor Equipment, Vacuum Emulsifying Mixer, Liquid washing equipment ,ect.
Laser processing technology uses laser beams and
Characteristics of material interactions A technique for cutting, welding, surface treatment, perforating, micromachining, and as a light source, identifying objects, etc. for materials (including metals and non-metals). The largest field of traditional applications is laser processing technology. Laser technology is a comprehensive technology involving many disciplines such as light, machine, electricity, materials and testing. Traditionally, its research scope can be generally divided into:
1. Laser processing system. Including lasers, light guide systems, processing machines, control systems and inspection systems.
2. Laser processing technology. Including laser cutting, laser welding, laser surface treatment, laser drilling, Laser Marking, laser scribing, laser micro-carving and other processing techniques.
Laser welding: automotive body thickness plates, automotive parts, lithium batteries, cardiac pacemakers, sealed relays and other sealing devices and a variety of devices that do not allow welding contamination and deformation. The lasers used in 2013 are YAG lasers, Co2 Lasers and semiconductor pump lasers.
Laser cutting: automotive industry, computer, electrical housing, wood knife mold industry, cutting of various metal parts and special materials, circular saw blades, acrylic, spring washers, copper plates for electronic parts below 2mm, some metals Stencil, steel pipe, tinplate, plated lead steel, phosphor bronze, bakelite, thin aluminum alloy, quartz glass, silicone rubber, alumina ceramics below 1mm, titanium alloy used in the aerospace industry, etc. The lasers used are YAG lasers and CO2 lasers.
Laser Machines,Laser Metal Cutting Machine,Laser Cutting Machine,Cnc Laser Cutting Machine
HARBIN QIAN FAN XI FENG MACHINERY CO.LTD , https://www.waterjetwamit.com