Design and Manufacture: EN, DIN, ISO, Russia or Gost STANDARDS
Size Ranges from DN15 to DN400 (1/2"~16")
Pressure Rating available in PN10, PN16, PN25, PN40, ANSI150, ANSI300, ANSI 600
Materials availalbe in Carbon Steel, Stainless Steel, Duplex or Alloy etc.
1. Bow-out proof stem
For the purpose of preventing the stem from flying off resulting in abnormal rising of the inner pressure of valve, shoulder is fixed at the lower part of the stem. In addition, in order to prevent leakage resulting from burnout of packing set of the stem in a fire, thrust bearing is set at the contact position of the shoulder at lower part of the stem and valve body. Thus an inverse seal seat is formed which will prevent leakage and avoid accident.
2. Anti-fire safe design
When the trunnion ball valve be used normally, its sealed by seat and ball surface, seat retainer sealed by O-ring and body, this is soft sealed and reliable sealing. When the seat and O-ring are burnt, the seat retainer and body will be sealed by expanded graphite. Thus act anti-fire safe purpose.
3. Anti-static device
In order to prevent friction among ball, stem and PTFE that generates static electricity which may light the combustibles and explosives that cause an accident, in this ball valve, static-conduction spring is set between the stem and the ball, the stem and the body. Thus static electricity is conducted to ground and system safety is secured.
4. Free leakage of body Sealed construction
The connective position of valve body and bonnet is double sealed by gasket and O-ring, on this base, such factors as fire, high temperature, shock and uneven opening or closing of the torque all can't induce external leakage.
5. Low torque in operation
The self-lubricated bearings are installed at the friction of stem, resulting in wear resistance, fiexibility of operation and low torque.
DESGN & MFT. | API 6D | ENDS CONNECTION | B.W |
PRE-TEP. RATING | ASME B16.34 | INSPECT & TEST | API 6D |
F-F DIMENSION | ANSI B16.10 | END CONNECTION | ANSI B16.25 |
MARKING | MSS SP-25 | FIRE SAFE DESIGN | AP1 607 |
PAITING | TBA | SPE. REQUIREMENTS | N.A |
ChemSta has been dedicated in designing and manufacturing devices used in oil production lines and vegetable protein production lines for more than 30 years. Up to now, there are about 200 successful engineering cases at home and abroad. We have hired over 100 professional engineers in various fields such as machinery, food, electricity and architecture. Hence, we are able to provide appropriate system solutions to meet customer`s requirements, such as Oils And Fats Equipment , Oils And Fats Production Line and Oils Turnkey Project , etc.
We also provide Vegetable Protein Project, Natural Plant Pigment Project, ASME Pressure Vessel , Horizontal Type Dryer , Spc Project , Spi Project , Full Fat Soybean Meal Project, etc.
Oils And Fats Project
Oils And Fats Project,Oils And Fats Machine,Oils And Fats Equipment,Oils And Fats Production Line,Oils And Fats Plant,Oils Turnkey Project
Shandong ChemSta Machinery Manufacturing Co.,Ltd. , https://www.oil-proteinmachine.com