Stainless Steel Fruit Slicing Machine Vegetable Slicer

Stainless steel fruit slicing machine vegetable slicer


Main use of vegetable cutter:
It is suitable for all kinds of vegetable processing in food industry such as dehydration, quick-freezing, fresh and pickling etc.
Cut into chunks: such as shallots (chives), leeks, leeks, celery, cilantro, peas, and beans;
Cutintopieces:Cabbage, olives vegetable, spinach.
Slice:yam, bamboo shoots and burdock.
Cut into shreds:potato,carrot,radish,lotus root.



Basic parameters of automatic cutting machinery:

Main technical parameters of vegetable cutting machine:
1.Cut into chunks:
Use special tool to cut stem material.The section length of the cutting material can be adjusted between 2-30mm.
2.Cutintopieces:
Use special cutting tool to cut material into 10*10-25*25mm



3.Cut into shreds:
Cut the material into wire with special cutting tool.The cut section is 3*3-10*10mm, with a length of 30mm (shred, dice, carrots).
4.Cutting tool Angle cutting:
Change the cutting tool and chute feeder installation Angle can be cut 30° to 45°oblique.The two kinds of cutting methods: horizontal and oblique cut.
5. Production: 500-2000kg/h.
6. Appearance: 1200*800* 1350mm, feeding tank 140*1000mm.
7. You can customize various knives.


 

Stainless steel fruit slicing machine vegetable slicer


Main use of vegetable cutter:
It is suitable for all kinds of vegetable processing in food industry such as dehydration, quick-freezing, fresh and pickling etc.
Cut into chunks: such as shallots (chives), leeks, leeks, celery, cilantro, peas, and beans;
Cutintopieces:Cabbage, olives vegetable, spinach.
Slice:yam, bamboo shoots and burdock.
Cut into shreds:potato,carrot,radish,lotus root.



Basic parameters of automatic cutting machinery:

Main technical parameters of vegetable cutting machine:
1.Cut into chunks:
Use special tool to cut stem material.The section length of the cutting material can be adjusted between 2-30mm.
2.Cutintopieces:
Use special cutting tool to cut material into 10*10-25*25mm



3.Cut into shreds:
Cut the material into wire with special cutting tool.The cut section is 3*3-10*10mm, with a length of 30mm (shred, dice, carrots).
4.Cutting tool Angle cutting:
Change the cutting tool and chute feeder installation Angle can be cut 30° to 45°oblique.The two kinds of cutting methods: horizontal and oblique cut.
5. Production: 500-2000kg/h.
6. Appearance: 1200*800* 1350mm, feeding tank 140*1000mm.
7. You can customize various knives.


 

As a professional manufacturer of telephone and RJ45 connectors, we also make RJ45 Connector Strain Relief to match with our plugs. We have different type, suitable for the cable outer OD from 3.5 to 8.0mm. 9 colors PVC compound are available.

Packing rate:

SPEC.	Q'TY PCS/CTN	N.W. KGS	G.W. KGS	Dimension(cm)
SRE2	5,000	9.00	10	400*375*290MM

Packing picture: 100pcs pairs/bag,

RJ45 Connector Strain Relief

RJ45 Connector Strain Relief, RJ45 Connector

Ningbo Excellence Communicated Connector Co., Ltd , http://www.patchcordmaker.com