Aeropak Mechanical Parts Engine Degreaser

Aeropak Mechanical Parts Engine Degreaser 

Aeropak Engine Degreaser is a concentrated solvent based degreaser suitable for use on engines, tools, mechanical parts, and concrete without damage to rubber and plastic.

Aeropak Engine Degreaser quickly removes dirt, dust, road grime, grease, oil, tar, wax and bitumen deposits and is safe for use on all engine components.

Item No.: APK8308
Weight: 500ml/400g net/14 oz 
Can Size: ∮65mm x 195mm H 
Package: 500ml x 12pcs/ctn 
Carton Size: 275x205x245 mm 
20ft Container Loading 2050 cartons

PREPARATION
A warm engine will produce better results.
APPLICATION
Leave engine idling about 5 minutes to warm grease & oil
Shut down engine and remove the air filter, and wrap or 
cover the carburetor and distributor using plastic or cloth.
IMPORTANT : Vigorously shake the can for a minute before use.
Spray to the surface of the engine with Aeropak Engine Degreaser.
After 5 minutes, wash it with clean water.

IMPORTANT : Do not start engine after applying
degreaser until engine is thoroughly washed

CLEAN UP
Remove any overspray from painted surfaces with soapy water immediately.?
CORRECT DISPOSAL
Spray unneeded product on to newspaper dispose to waste. 
Empty can is recyclable.
PRECAUTIONS
Do not use near fire or naked flame. 
Do not puncture or incinerate even if empty. 
Keep in a cool place out of direct sunlight. 
Do not store above 50°C. / 122 F
Never spray at eyes or face.
PROPELLANT: HYDROCARBON
SAFETY WARNINGS
Keep out of reach of children If swallowed seek medical 
advice immediately.

Warning - intentional misuse by deliberately inhaling contents
can be harmful or even fatal.


Directions

1 Shut down the engine after idling about 5 minutes.
2 Remove the air filter, and then cover the carburetor and distributor using plastic or cloth.
3 Shake the can vigorously before spraying, and then spray to the surface of the engine.
4 After 5 minutes, wash it with clean water.

Precautions
1. Keep away from heat, flame, spark and other source of ignition.
2. Store in a cool, dry place (45°C); Avoid direct sunlight.
3. Do not clash, puncture, or incinerate the can.
4. Keep out of reach of children;

FAQ
Q1. Are you manufacturer?
A: Yes, we Shenzhen i-Like Fine Chemical is a professional manufacturer of aerosol products,  especially in car care products, Aeropak spray paints,  tyre sealer and inflators,  air dusters,  spray adhesives,  etc.  

Q2. What is your terms of payment?
A: Payment terms vary according to order quantity and agency policy, negotiable upon contact.  We'll show you the photos of the products and packages before loading the goods.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. 

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply 2-3 samples for free,  but as this is aerosol products with pressurized gas,  it is dangerous goods, the courier cost is very high, say about USD 100-200 for 2kg parcels.  And the freight cost need to be prepaid by customers.

Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ; Only you win first, and then we can win.
A2. We respect every customer as our friends and we sincerely do business and make friends with them, 
no matter where they come from.

Why to be AEROPAK distributor?
1.AEROPAK is US Style design with US standard quality and net weight.
2.AEROPAK products passed required tests and certificates like RoHS, REACH, etc..
3.AEROPAK is individually barcoded for every item and every color, which is good for stock control and retailing.
4.AEROPAK offers POS & SKU CSV information and English Flyers.
5.AEROPAK offers PDF & Printed Catalogue and Colorcharts.
6.AEROPAK's strong R&D will make more and more new products to expand your market shares.
7.AEROPAK will offer great support for your sales, including your information on our website, cans, catalogue and colorcharts, etc., and will offer many differnt gifts for your promotion, even will also support you for your local trade show.
8.AEROPAK will benefit you a reward of 1-2% of your yearly salesvolumet, according to your yearly order amount.
9.AEROPAK will accept upto 10% OA (Open Acount) according to your yearly order amount.
10.AEROPAK will invite our GOLD DISTRIBUTORS to China for a 7-days traveling. 

 

 

 

Aeropak Mechanical Parts Engine Degreaser 

Aeropak Engine Degreaser is a concentrated solvent based degreaser suitable for use on engines, tools, mechanical parts, and concrete without damage to rubber and plastic.

Aeropak Engine Degreaser quickly removes dirt, dust, road grime, grease, oil, tar, wax and bitumen deposits and is safe for use on all engine components.

Item No.: APK8308
Weight: 500ml/400g net/14 oz 
Can Size: ∮65mm x 195mm H 
Package: 500ml x 12pcs/ctn 
Carton Size: 275x205x245 mm 
20ft Container Loading 2050 cartons

PREPARATION
A warm engine will produce better results.
APPLICATION
Leave engine idling about 5 minutes to warm grease & oil
Shut down engine and remove the air filter, and wrap or 
cover the carburetor and distributor using plastic or cloth.
IMPORTANT : Vigorously shake the can for a minute before use.
Spray to the surface of the engine with Aeropak Engine Degreaser.
After 5 minutes, wash it with clean water.

IMPORTANT : Do not start engine after applying
degreaser until engine is thoroughly washed

CLEAN UP
Remove any overspray from painted surfaces with soapy water immediately.?
CORRECT DISPOSAL
Spray unneeded product on to newspaper dispose to waste. 
Empty can is recyclable.
PRECAUTIONS
Do not use near fire or naked flame. 
Do not puncture or incinerate even if empty. 
Keep in a cool place out of direct sunlight. 
Do not store above 50°C. / 122 F
Never spray at eyes or face.
PROPELLANT: HYDROCARBON
SAFETY WARNINGS
Keep out of reach of children If swallowed seek medical 
advice immediately.

Warning - intentional misuse by deliberately inhaling contents
can be harmful or even fatal.


Directions

1 Shut down the engine after idling about 5 minutes.
2 Remove the air filter, and then cover the carburetor and distributor using plastic or cloth.
3 Shake the can vigorously before spraying, and then spray to the surface of the engine.
4 After 5 minutes, wash it with clean water.

Precautions
1. Keep away from heat, flame, spark and other source of ignition.
2. Store in a cool, dry place (45°C); Avoid direct sunlight.
3. Do not clash, puncture, or incinerate the can.
4. Keep out of reach of children;

FAQ
Q1. Are you manufacturer?
A: Yes, we Shenzhen i-Like Fine Chemical is a professional manufacturer of aerosol products,  especially in car care products, Aeropak spray paints,  tyre sealer and inflators,  air dusters,  spray adhesives,  etc.  

Q2. What is your terms of payment?
A: Payment terms vary according to order quantity and agency policy, negotiable upon contact.  We'll show you the photos of the products and packages before loading the goods.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. 

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply 2-3 samples for free,  but as this is aerosol products with pressurized gas,  it is dangerous goods, the courier cost is very high, say about USD 100-200 for 2kg parcels.  And the freight cost need to be prepaid by customers.

Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ; Only you win first, and then we can win.
A2. We respect every customer as our friends and we sincerely do business and make friends with them, 
no matter where they come from.

Why to be AEROPAK distributor?
1.AEROPAK is US Style design with US standard quality and net weight.
2.AEROPAK products passed required tests and certificates like RoHS, REACH, etc..
3.AEROPAK is individually barcoded for every item and every color, which is good for stock control and retailing.
4.AEROPAK offers POS & SKU CSV information and English Flyers.
5.AEROPAK offers PDF & Printed Catalogue and Colorcharts.
6.AEROPAK's strong R&D will make more and more new products to expand your market shares.
7.AEROPAK will offer great support for your sales, including your information on our website, cans, catalogue and colorcharts, etc., and will offer many differnt gifts for your promotion, even will also support you for your local trade show.
8.AEROPAK will benefit you a reward of 1-2% of your yearly salesvolumet, according to your yearly order amount.
9.AEROPAK will accept upto 10% OA (Open Acount) according to your yearly order amount.
10.AEROPAK will invite our GOLD DISTRIBUTORS to China for a 7-days traveling. 

 

 

 

The cemented carbide seal-ring can be divided into both or the kinetic seal-ring and staticseal-ring, and constitutes mechanic seal together with the spring, rubber seal-ring and steel jacket.

The precision seal-ring is made of high quality materials by an advanced process, having very complicated shapes, high accuracy, stable mechanic properties, much higher wear and corrosion resistance, and a service life of more than twenty thousand hours in the normal case.

The Seal Ring will be used mainly for waste water pump,water discharge pump for mines, centrifugal pump, centrifuge, slag slurry pump and slurry abrasion and corrosion. The seal-ring will be installed on the pump body andratatingaxle, and forms through the end face of the kinetic and static ring a liquid or gas seal.

Seal Ring

Seal Ring,Hard Alloy Sealing Ring,Hard Metal Sealing Ring,Cemented Carbide Mechanical Seal Ring

Zhengtong Special Material Factory Hi&New Tech Zone Chengdu , https://www.ztferre.com