Euro Connector for Easb Welding Torch

Model NO.: HRPSFM14X1/HRPSFM10X1
HS Code: 85159000
Euro Connector for Easb Welding Torch
Euro Connector for esab Welding Torch
Item CO2 Euro Connector Compatible for  ESAB Torch
Material Brass
Type HRPSFM14X1, Esab Euro Connector
HRPSFM10X1, Esab Euro Connector
Packing 10pcs/box
Certification ISO9001, CCC, CE, ROHS, TUV
Euro Connector for Easb Welding Torch
Changzhou Huarui Welding & Cutting Co., LTD

Since the establishment in 1985, we have become one of the biggest manufacturers of welding
and cutting equipment and accessories in China by modern manufacturing equipment and special
technology. We are specialized in manufacturing MIG, TIG, PLASMA, Welding Torches and Spare
parts. With Euro connector, Lincoln connector , Miller connector and Tweco connector, we can fit
different kinds of foreign equipments.
1.MIG Welding Torch
Binzel,Bernard,Tweco,Esab,Lincoln/Tregaskiss,Panasonic/OTC, MAXI,Kemppi,Fronius,Mechafin.
2.TIG Welding Torch
WP-24, WP-9,WP-17, WP-26, WP-20, WP-18, etc.
3.Plasma Cutting Torch
Trafimet, Cebora, Panasonic/Esab
Euro Connector for Easb Welding Torch
Euro Connector for Easb Welding Torch
FAQ
Q1: Can I get a samples to check the quality?
A:Sure,we can supply samples. For regular goods, the sample cost is different from the amount
you want.For our new products, there's a MOQ of the samples.
Q2: Can I put my logo on the boxes/cartons?
A: Yes, this can be made according to your requirements, but you should send us the trademark
authorization letter.
Q3: How can you guarantee your products quality ?
A: Huarui's each torch must pass the following tests before packing: Insulation resistance test,
High voltage test, Air/Water flow test, Air/Water seal test.
If there are defective items, we usually credit to our customer or replace in the next shipment.
Q4: What's the order procedure?
A: Firstly, we discuss the details together by e-mail or TM. Then we issue you a PI for your
confirmation or Trade Assurance Order Payment Link. You will be requested to do the pre-paid
full payment before we go into the production. After we get the payment, we start to process the
order. It usually takes 5-15days if we don't have the  items in stock.
 

A Solenoid Valve is an electromechanically operated valve. The valve is controlled by an electric current through a solenoid: in the case of a two-port valve the flow is switched on or off; in the case of a three-port valve, the outflow is switched between the two outlet ports. Multiple solenoid valves can be placed together on a manifold.

Solenoid valves are the most frequently used control elements in fluidics. Their tasks are to shut off, release, dose, distribute or mix fluids. They are found in many application areas. Solenoids offer fast and safe switching, high reliability, long service life, good medium compatibility of the materials used, low control power and compact design.

Besides the plunger-type actuator which is used most frequently, pivoted-armature actuators and rocker actuators are also used.


Solenoid valve designs have many variations and challenges.

Common components of a solenoid valve:

  • Solenoid subassembly
    • Retaining clip (a.k.a. coil clip)
    • Solenoid Valve Timer
    • Solenoid Coil (with magnetic return path)
    • Core tube (a.k.a. armature tube, plunger tube, solenoid valve tube, sleeve, guide assembly)
    • Plugnut (a.k.a. fixed core)
    • Shading coil (a.k.a. shading ring)
    • Core spring (a.k.a. counter spring)
    • Core (a.k.a. plunger, armature)
  • Core tube–bonnet seal
  • Bonnet (a.k.a. cover)
  • Bonnet–diaphram–body seal
  • Hanger spring
  • Backup washer
  • Diaphram
    • Bleed hole
  • Disk
  • Valve body
    • Seat
    • air valve
    • water inlet valve
    • control valve

The core or plunger is the magnetic component that moves when the solenoid is energized. The core is coaxial with the solenoid. The core's movement will make or break the seals that control the movement of the fluid. When the coil is not energized, springs will hold the core in its normal position.

The plugnut is also coaxial.

The core tube contains and guides the core. It also retains the plugnut and may seal the fluid. To optimize the movement of the core, the core tube needs to be nonmagnetic. If the core tube were magnetic, then it would offer a shunt path for the field lines. In some designs, the core tube is an enclosed metal shell produced by deep drawing. Such a design simplifies the sealing problems because the fluid cannot escape from the enclosure, but the design also increases the magnetic path resistance because the magnetic path must traverse the thickness of the core tube twice: once near the plugnut and once near the core. In some other designs, the core tube is not closed but rather an open tube that slips over one end of the plugnut. To retain the plugnut, the tube might be crimped to the plugnut. An O-ring seal between the tube and the plugnut will prevent the fluid from escaping.

The solenoid coil consists of many turns of copper wire that surround the core tube and induce the movement of the core. The coil is often encapsulated in epoxy. The coil also has an iron frame that provides a low magnetic path resistance.


Solenoid Valve

Electromagnetic Valve, Pneumatic Component, Pneumatic Solenoid Valve, Air Compressor Valve,Solenoid Valve Timer

NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com