Are there any five ways that LED display screens are installed on glass walls?

Outdoor LED glass curtain wall is one of the most common installation methods. It can be roughly divided from his structure: full-hiding box LED display glass curtain wall, semi-hidden box LED display glass curtain wall, transparent glass box curtain wall, no bracket glass curtain wall, etc. Several, but the LED display glass curtain wall structure is not the same, the dark rise is not the same way, he will affect the LED display installation, the following brief introduction of several led display screen wall installation method.
Method one: Fully concealed box LED display screen glass wall installation and fixing method
The installation method of the full hidden frame LED display glass curtain wall is that the LED display glass wall curtain is fixed on the aluminum alloy frame, and the upper and lower beams of the aluminum alloy sash are matched up and down, and the two sides of the glass respectively correspond to the aluminum alloy sashes. Rod.
Method 2: Installation and fixing method of semi-hidden frame LED display glass curtain wall
Since the horizontal and vertical horizontal glass curtain walls are called semi-hidden glass curtain walls, there are two ways to install the semi-hidden curtain wall glass. Vertically concealed is the glass installation embedded in the slot fixed, left and right horizontally and then glued with glass adhesive; vertical horizontal curtain wall glass to put the glass in the aluminum alloy inlay channel groove, and then outside the glass capping Press the plate and hide the aluminum rods behind the glass.
Third, the bright glass curtain wall installation method
The type of glass structure of the bright-framed curtain wall Whether it is the skeleton and glass frame made of special aluminum alloy profiles or the skeleton steel, the aluminum alloy frame in the entire curtain wall will be exposed.
Four, rack-mounted curtain wall glass installation method
This is an installation method in which the post is welded to the stainless steel pendant. The four claws of the pendant are connected to the glass wall of the curtain wall. One hole corresponds to one claw. It can also be said to first drill a hole in the four corners of the glass, and then fix the glass on the four claws of the stainless steel pendant.
Fifth, no skeleton wall glass installation method
The glass on the non-skeletal curtain wall can also be called structural glass. This kind of curtain wall is mostly used in the first floor of the building. Similar to the floor-to-ceiling window of a building, the glass is installed in the form of a hoisting device. It is a kind of hook or special profile using well-spaced parts. Method of suspending the glass from above. The operation steps are firstly fixed on the main frame of the channel steel with a special profile hook, and then the channel steel is suspended and suspended under the bottom of the plate or the beam. The rigidity of the glass is strengthened, and a supporting frame or horizontal frame may be added on the upper and lower sides of the glass. files.

Process

The sheet is processed in the following steps: decoil the raw material, feed with a fixed length via the servo motor, shearing it with various shearing tools into sheets of various types according to the drawing and then piling them on the stacking table via the conveying mechanism and the arranging mechanism.

 

Functional features:

1. This device can complete automatic production of various sheets for laminated, Full tapered seam cores.

2. Shearing power: imported electrical servo control technology is adopted, so the device is featured by high speed, low noise and long life.

3. Feeding power: adopt high torque AC synchronous servo motor, so has characteristics such as rapid response, high positioning and accuracy, low noise, low braking thermal loss and long life.

4. Track positioning: the centralized positioning is achieved by dragging the linear tracks of the ball screw with a servo motor. So the positioning is rapid, accurate and convenient and the track width can be memorized automatically.

5. Movement control: advanced PCC control and ethernet powerlink communication technology is adopted, reducing greatly wiring and imporving the reliability, stability and real time of the system remote control and trouble diagnosis can be achieved via the above control and technology, shortening the maintenance time and reducing the cost to the largest extent.

6. Arrangement mode: the backward pushing arrangement mde is adopted and long sheets can be arranged orderly with low vibration, reducing the orientational permeance of the processing process on silicon steel sheets to the largest extent.

7. Life guarantee: standard components of the device are imported quality ones. High accuracy of processing and assembly of basic components extents the service life of the device to the largest extent.

8. This device is a high techmechanical, optical and electrical integrated product with multiple patented technologies, it represents high manufacture level of domestic transverse shear lines and can substitute imported products, saving much outsourcing fund. Some models have automatic cut in cut become column functions.

 

Cut To Length Line Machine

Cut To Length Machine,Cut To Length Line Machine,Cut To Length Line,Metal Shearing Machine

JINAN EURO-ASIA INT'L CO., LTD , https://www.eaelectricmachine.com