- Model NO.: pipe straightening
- Usage: Wire, Pipe
- Automatic Grade: Automatic
- Warranty: 12 Months
- Condition: New
- Specification: 2300mm× 600mm× 1280mm
- Type: Wire Straightening
- Voltage: 220V
- Principle: Large Deformation
- Customized: Customized
- Transport Package: Wooden
- HS Code: 0701900000
Specifications
1. Model:2300mm*600mm*1280mm
1. Model:2300mm*600mm*1280mm
2. Drilling crew plane height: About 850mm
3. Weight:500kg
4. Power Supply: Three-phase five-wire 380v bring zero line and ground wire
5. Power: 3kw
6. Air Pressure: 0.5-0.8mpa
7. rough shape cutting to adapt to the pipe:4-16 aluminium tube;4-16 copper pipe;4-16 band pipe
8. Feeding speed: 0-50M
9. cutting ways: Single - knife direct rotation without cuttings cutting. clipping time: 2-2.5S/time. Three meters per time about 6 seconds, An eight-hour day produces about 3,000 to 4,000 pieces.
10. Equipment use field: Automobile, air conditioning, refrigerator freezer, water dispenser, home appliance, etc.
11. control principle:PLC programmable logic controller,OP-320text operation,Synchronous belt feeding,servo motor drive,Japan omron rotary encoder counting,The pneumatic original adopts SNS.
12. This machine is aimed at the following (copper tube). The tube is straightened to the straightening mechanism of the main engine, and the servo motor drives the synchronous belt to drive the pipe to the cutting-free cutting machine.Finally, it is taken over by pneumatic aggregates, and the whole process is automatic and reliable. The machine break up and operate automatically, the mold change is simple, the operation is simple, the production efficiency is high.
13. Main structure and principle:Mechanical structure: it is composed of flat rack, straightening group, feeding tube section, cutting head section and feeding frame.
Gas path control: cylinder clamp, servo drive synchronous belt feeding tube, cylinder clamp, cutting tube, pull, cylinder connection.
Circuit control system: by PLC control servo motor forward tube, after the length of the encoder, after reaching the set length, the PLC control solenoid valve action, drive the cylinder to cut off the pipe.
Processing pipe: this equipment is a single pipe equipment, and the size of the open material pipe is applicable to the mechanical limit range. Different materials need to be replaced with straightening wheel,
Â
Â
Core Drill Rig,Core Rig,Core Drilling Rig
Water Well Drilling Rig Co., Ltd. , http://www.nsdrillingrig.com