Oil Parts High-Pressure Stand Pipe

Oil parts High-Pressure Stand Pipe

Meeting the high-pressure stand pipe Z23Y100-5000PSI and Z23Y50-5000PSI slurry valve, high pressure oil azelaic spherical, high-pressure cone by the Wang, tees, high pressure hose, elbow, pressure gauge, a short section and so on.
Ground valve group were goose shaped three structures, with a compact, fluid resistance small, can give full play to the characteristics of power.
Reducing drilling platform with four-way valve unit can be directly used for single tube, easy field use.
Wang pressure from the high-strength alloy steel and heat-treated. Structure for fast loading and unloading operations. Manufactured by special equipment by the Wang. By finishing in the sphere, cone with the ring to achieve sealing.
Z23Y-5000PSI mud gate valve and valve seat are used carbide spray, erosion resistant, corrosion-resistant characteristics, greatly enhance the life of the valve, and the operation torque is small, light switches and so on.
Manifold of the elbow, reducer, tee, and Stone and other high-strength alloy steel casting, proper thickening of the wall, and by the good treatment that can fully meet the requirements of strength and corrosion resistance.
Of high precision parts using special processing technology, to ensure manufacturing quality; On by the high parts in the assembly have to undergo a hydrostatic strength and sealing test, strict factory quality assurance.
Installation:
1, the installation, you should wash the face and the sealing ring groove Wang, apply grease to remove material pipe organs.
2, double-check all connections are on tight.
3, the removal of parts can be open, clean lines, occupies a bit after the grease coated bandage, to prevent dirt to enter and damage the screw thread and the sealing surface.
Use and maintenance of key points:
1, on a regular basis to the slurry of calcium-based grease filling valve, maintenance gate.
2, periodically check to see whether the connections and mounting bolts loose.
3, found that leakage of sealing parts, the seal should be replaced to prevent damage to the related metal parts.
4, maintaining the appearance manifold clean, anti-corrosion coating.


  Oil parts High-Pressure Stand Pipe

Meeting the high-pressure stand pipe Z23Y100-5000PSI and Z23Y50-5000PSI slurry valve, high pressure oil azelaic spherical, high-pressure cone by the Wang, tees, high pressure hose, elbow, pressure gauge, a short section and so on.
Ground valve group were goose shaped three structures, with a compact, fluid resistance small, can give full play to the characteristics of power.
Reducing drilling platform with four-way valve unit can be directly used for single tube, easy field use.
Wang pressure from the high-strength alloy steel and heat-treated. Structure for fast loading and unloading operations. Manufactured by special equipment by the Wang. By finishing in the sphere, cone with the ring to achieve sealing.
Z23Y-5000PSI mud gate valve and valve seat are used carbide spray, erosion resistant, corrosion-resistant characteristics, greatly enhance the life of the valve, and the operation torque is small, light switches and so on.
Manifold of the elbow, reducer, tee, and Stone and other high-strength alloy steel casting, proper thickening of the wall, and by the good treatment that can fully meet the requirements of strength and corrosion resistance.
Of high precision parts using special processing technology, to ensure manufacturing quality; On by the high parts in the assembly have to undergo a hydrostatic strength and sealing test, strict factory quality assurance.
Installation:
1, the installation, you should wash the face and the sealing ring groove Wang, apply grease to remove material pipe organs.
2, double-check all connections are on tight.
3, the removal of parts can be open, clean lines, occupies a bit after the grease coated bandage, to prevent dirt to enter and damage the screw thread and the sealing surface.
Use and maintenance of key points:
1, on a regular basis to the slurry of calcium-based grease filling valve, maintenance gate.
2, periodically check to see whether the connections and mounting bolts loose.
3, found that leakage of sealing parts, the seal should be replaced to prevent damage to the related metal parts.
4, maintaining the appearance manifold clean, anti-corrosion coating.


 

Goodsense forklift new generation electric  counter balance forklift advantages:

-load capacity of 2000kg, 2500kg, stable and economic.

-High-Strength Overhead Guard

-Famouse Shell Brand Hydraulic Oil

-ISO14001 Environmental Certification,All nuts use zinc clear.

-Korean KCC painting

-Wide view Mast

-Battery can be taken out easily(two way,From top and from side)

-LED lamp

-Curtis or Zapi AC controller

-Famous brand battery and charger

-Reasonable structure,better heat dissipation for controller

-Battery water automatic replenish for optional

-Powerful AC driving motor applied to reduce maintenance cost and increase the overall performance.

 

General
Model			FB20	FB25
Power Type			Electric	Electric
Load Capacity		kg	2000	2500
Load centre		mm	500	500
Tyre
Tyre			Pneumatic Tyre	Pneumatic Tyre
Front Tyre			7.00-12-12PR	7.00-12-12PR
Rear Tyre			18×7-8-14PR	18×7-8-14PR
Overall Dimension
Lift Height		mm	3000	3000
Fork Size	L×W×T	mm	1070×120×40	1070×120×40
Mast Tilt Angle	F/R	.	6/12	6/12
Mast Lowered Height		mm	2070	2070
Mast Extended Height(with backrest)		mm	4070	4070
Length to face of fork(Without fork)		mm	2360	2360
Overall Width		mm	1160	1160
Overhead Guard Height		mm	2240	2240

 

 

 

Application Area:

1.Warehouse

2.Port

3.Factory

4.Distribution Center

5.Logistics

 

If you have any other questions,please contact us directly.Our forklift are all with high quality,and you can choose any other engine to equip.It can be produced according to your idea.And we invite you to visit our factory.

2.0-2.5Ton Electric Forklift

2.0-2.5Ton Electric Forklift,2.0Ton Electric Forklift,2.5Ton Electric Forklift

ZHEJIANG GOODSENSE FORKLIFT CO.,LTD , http://www.goodsenseforklift.com