Every person who stayed in the driving school received a driver's license from the beginning to the end of the subject. In addition to the coaches and other trainees, there was also a driving school coach. I believe that everyone who has learned a driver’s license knows that the driving school’s car is not the same as the usual car. Apart from the same appearance, what is the difference between a coach car and an ordinary car? What should you watch out for when using it?
The coach is a teaching vehicle that drives the instructor's driving skills in the driving school. The coach is different from the ordinary car. Apart from the device used by the driver, there is also the device for controlling the vehicle when the coach teaches, in order to avoid the students being unfamiliar. A driving error occurred and caused the accident.
Whether it is an ordinary car or driving school coaches should have regular inspection and maintenance, inspection and maintenance is to ensure the use of the car, reduce the damage caused by mechanical wear on the car, and extend its use time. As a special vehicle for coaches, in order to ensure its basic daily teaching, it should be more stringent to carry out the inspection and maintenance of the car.
Daily inspections are indispensable. Every day before use, a thorough inspection of the car should be carried out to eliminate possible malfunctions and timely detection and timely maintenance. If it is a fault in the course of driving, the coach should immediately stop and check if it is. Failures that cannot be ruled out must be promptly contacted by professionals for maintenance; the final step is to check every day after the training is finished, check all parts and clean the inside of the vehicle.
In addition to routine inspections, the maintenance and repair of the car are indispensable. Driving school coaches are different from ordinary cars. Every day the car is trained, and more often it is a novice. The car wears more often than ordinary cars. . Therefore, the coach must be regularly maintained and maintained, and its maintenance frequency is higher than that of an ordinary car. In addition to routine inspections and maintenance, before each training, the coach should emphasize and demonstrate the standard operation. Trainees should follow the coach's requirements during training to ensure the safe and reasonable use of the car.
The above is the relevant considerations in the use of the driving school coaches. If each trainee and coach can follow the regulations, it can guarantee the reasonable use of the car.
Steel-drawer
Model:XY-P80 XY-p120
Specification:
The Steel-drawer pull out the whole bar, the sidewall because of the role of the pull mouth,promoting rubber tearing, smoothly separate wire and rubber.
Advantages:
1.This equipment adopts double vane pump to supply oil, low working noise, at the same time to ensure the speed and pressure of the drawing cylinder when working, and improve the working efficiency and the service life of the valve.
2.The automatic lifting device is adopted to reduce the labor intensity of workers;
3.The inner guide rail positioning, make sensor reliability retractor positioning highly accuracy, drawing cylinder operation smoothly.
4.Using manual automatic exchange of work,flexible choice.
Automatic Feeding Machine
Model: XY-AL200 / XY-AL500 / XY-AL800 / XY-AL1200
Specification:
Automatic feeding machine mainly through the use of 60 tons of hydraulic pressure as the driving force, can be used to push scrap plastic/ tires with hydraulic column extrusion into reactor, the whole operation process is stable, simple and convenient.
Advantages:
Fully automatic design, save time and manpower;
Highly improve the feeding capacity: manually feeding can only reach 150-170KGS/m³. By using the automatic feeding machine, it could reach to 240-280KGS/m³, which greatly improve the feeding capacity.
Model: XY-C800 XY-C1200
Specifications:
The tyre cutting machine is applied to cut all kinds of rubber blocks and strips,it is good for cutting rubber tyre,rail tyre, rubber strips etc.
Advantages:
1.This machine with large cutting knife,good shearing effect,fast cutting speed and low energy consumption;
2.Small size, easy to move;
3.Adopt hydraulic system, easy to operate and very safe design.
The Whole Tyre Crusher
Model: XY-SH800 / XY-SH1200
Specifications:
At the room temperature, put the tyre or large plastics of rubber into the press directly,which can be crushed into 1-8cm pieces.
Advantages:
1.Compact structure, advanced technology, low energy consumption, high efficiency;
2.The crushing chamber is an open structure,which is convenient for maintenance;
The knife is made of hard alloy steel, which has high hardness, high wear resistance and can be used repeatedly;
3.This machine adopts the hardened reducer, round screen for structural steel wire mesh, large blanking area,which is good for qualified rubber material screening.
Tyre Steel Drawer,Automatic Feeder, Assistant Equipments
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl