Ce Approved Copper Wire Plastic Granulator

Model NO.: QJF-600
Function: Copper Cable Recycling
Power Support: Electric
Power: 52.36kW
Voltage: As Required
Output: Clean Copper Pellet & Plastic Pellet
Dimension: 4.3 * 1.95 * 2.4m
Color: As Required
Transport Package: Container & Ply Wooden Case
Specification: 52.36kW
Origin: China
HS Code: 84798190
Copper Wire Plastic Granulator Features:
The QJF series copper wire recycling machine is designed for the efficient processing of waste communication cables, motor cables, car cables, and other industrial cables. It integrates crushing, separation, and a high-efficiency dust COLLECTION system to produce clean copper and plastic pellets.
QJF-600 Copper Wire Plastic Granulator Introduction:
The QJF-600 model (capacity: 300-400kg/h) offers high recycling efficiency and purity. The mixed crushed material (copper and plastic) enters the vibrating separator along with air flow, and finally reaches the secondary vibrator to achieve 100% purity.
 CE Approved Copper Wire Plastic Granulator
 Copper Wire Plastic Granulator Advantage:
1. Compact and integrated design, easy to move, saves space.
2. Low power consumption and stable performance.
3. Minimum copper recovery rate can reach up to 99%.
4. No water required, no dust, no environmental pollution.
5. Fully automated with an electric control panel.
Copper Wire Plastic Granulator Application:
Applicable Cables: Waste communication copper cables, motor cables, car cables, industrial cables, household cables, and enameled cables.
Applicable Cable Diameter: 0.3 - 20mm
If you are unsure whether your cables are suitable for our equipment, you can send samples for free testing.TESTING IS FREE! 
CE Approved Copper Wire Plastic Granulator
Copper Wire Plastic Granulator Working Principle:
CE Approved Copper Wire Plastic Granulator
 
  1. Wires and cables are fed into the crusher, where they are crushed and completely separated into copper and plastic. The length of the crushed material depends on the mesh size of the screen; larger mesh results in longer pieces and higher output. Mesh size should be chosen based on the type of material being processed.
  2. The crushed mixture of copper granules and plastic pieces is conveyed to the separator by a conveyor. During this process, dust and some lightweight plastic fragments (including fibers, ropes, or tapes mixed in the wires) are collected by the pressure-reducing blower. This blower is connected to a dust collector with a filter bag to prevent dust emissions and ensure environmental protection. Dust and lightweight plastics are collected in the bag and discharged when full.
  3. The separator is used to separate plastic pieces from copper granules. Based on differences in physical properties and specific gravity, there is a deviation under the forces of aerodynamics and vibration friction. By adjusting the conveying speed and amplitude parameters, copper granules (with higher specific gravity) will move to the bottom of the screen and travel upward, while plastic pieces (with lower specific gravity) will move to the top and travel downward, eventually being discharged through separate outlets.
All units are installed on a single base, forming a complete structure. The machine is pre-adjusted for production before shipping, so customers only need to connect it to the power supply.

Copper Wire Plastic Granulator Specifications: 
Model Recycling Capacity Processed Wire Dia. Total Power Voltage Dimension Weight
QJF-600 300-400kg/h 0.3-20mm 52.36kW As Required 4.3 * 1.95 * 2.4m 3400kg
Copper Wire Plastic Granulator Parts:CE Approved Copper Wire Plastic Granulator
We also offer larger capacity models. Contact us for more information: 
CE Approved Copper Wire Plastic Granulator
FAQ
 1. Are there any wear parts on the machine?
The main wear parts are blades and screens, which have a service life of over 2 years. We can also provide a blade sharpening machine for maintenance.
2. What is the maximum continuous working time for the recycling machine?   
 Normally 10 hours per day.
3. Is the machine easy to operate? How many workers are needed? 
Our machine features a precise yet simple control system. For a single unit, one worker is sufficient. For a complete line, two workers are recommended.

Contact Information: 
Attn: Tina
Mobile: +86 159 8192 5357

LATEX BALLOON

AMERICA DIVISION OF TOP SHINE CO.,LTD. , https://www.fiestasupplier.com