[Keywords]: Kunlun coast, wireless temperature and humidity, wireless receiver module application needs on-site needs to display, using wireless transmission, the site needs to monitor 90 nodes, are distributed in the plant, dehumidification room and other places, the plant workshop contains a large number of printing equipment The dehumidifying room is a closed position. Each building is equipped with a receiving module to receive data from each floor node. The system needs to monitor and collect temperature and humidity at all nodes, and set alarms and e-mail alarms. The wireless sensor needs long and stable transmission distance, strong anti-jamming capability, accurate data transmission, and the receiving module needs an Ethernet interface. It adopts Ethernet transmission. The configuration software needs reliable, comprehensive and authoritative software.
System diagram
System function introduction The system hardware adopts Kunlun coast wireless temperature and humidity JZH-101-12, JZH-001-12, wireless receiving module KL-W6600, the upper computer adopts Kingview monitoring software. The project uses a total of 105 wireless temperature and humidity, 10 KL-W6600, each KL-W6600 connected to about 10 wireless temperature and humidity nodes, through the wireless transmission. The wireless temperature and humidity are distributed in 9 buildings and 2 science and technology buildings. Each building has 5 floors. Each building is equipped with a KL-W6600. Each building is equipped with JZH-101-12 on each floor. Kunlun Coast JZH-101-12 can transmit temperature and humidity data as well as transfer function. This greatly increases the wireless output distance and ensures that the temperature and humidity data of each floor is normally transmitted to the KL-W6600. PC software realizes collecting all temperature and humidity data and exporting EXCEL files. You can browse and export data and data density in 5 minutes by sub-area, time, and by setting alarms and e-mails to alarms over a certain range of data. Humidity node 30 minutes break alarm. The project has been running for about 1 year. The hardware of the product is stable and the data is accurate in real time. It fully meets customer requirements.
The multifunction busbar processing machine is the patented product developed by our company. Comparing with the traditional busbar processing machine, this product has the following advantages and features:
1. The punching unit adopts column structure, with novel and unique design rendering reasonable force bearing, and thus effectively guarantees the long-term use without deformation;
2. The shearing unit adopts round integral structure, with novel and unique design rendering reasonable force bearing, and thus effectively guarantees the long-term use without deformation;
3. The bending unit uses integral structure and CNC angle control mode, allowing easy operation and high accuracy;
4. This machine adopts the design approach of double-layer work bench, truly realizing the simultaneous working of three stations without mutual interference;
5. The machine is provided with an automatic oil charge and discharge system, easy to operate, with the hydraulic oil charged into the oil tank via a filter so as to protect the entire hydraulic system from contamination;
6. This machine is provided with stainless steel oil tank to protect the hydraulic oil from corrosive deterioration, and extend the service life of hydraulic oil and the seals;
7. Swappable dies offering extreme convenience;
8. PLC control that is stable and reliable.
Cnc Punching Machine,Busbar Processing Machine,Steel Angle Punching Machine,High Speed Punching Machine
JINAN EURO-ASIA MACHINERY CO., LTD , http://www.euroasiamachine.com