Atex Approved 11A Automatic Fuel Nozzle

Production Description: Specification: 

Oil inlet: NPT3/4", BSPT3/4". 
Oil outlet: 15/16", 13/16 ". 
Flux range: 0-60L/min or 0-45L/min. 
Nominal pressure: 0.18MPa. 
Self sealing time: 0.1s (max). 

Features: 

Automatic nozzles for diesel, kerosene and all kinds of gasoline service. 
Easily replaced spout simply removes the screw 
Spout kits available 
Low-profile aluminum body: Light weight, easier to handle, provides an attractive, image-enhancing appearance 
Vacuum design: Back-sealing design 
Selective casting process of body 
Sand casting technique or high-pressure casting 
Technique. High-pressure casting technique can reduce diesel foaming and static electricity 
Hold-open rack is available for full service applications 
One-hand control means easy setting to flow rate for customer's convenience 
Full hand insulator protects both nozzle and vehicle, and insulates user's hands 
Available colors: Color chart on inside back cover 
Selective splash guard 
100% factory tested

Sample Shipping:

By express (DHL, FedEx, UPS, etc.)

Sample's lead time: 2-5 days 

Mass productions' lead time: 7-31 days 

By sea shipping when bulk order

Company Information:
Wenzhou Jiahao Petroleum Machinery Co.,Ltd. is a professional manufacturer of petroleum machinery products since 2010, which is located in Wenzhou, China. The main products are Oil Nozzle&Adblue Nozzle Series, including Automatic Fuel Nozzle, Manual Nozzle, Plastic Chemical Nozzle, Vapor Recovery Nozzle, Fuel Nozzle with Flowmeter, Adblue Nozzle, etc; Flow meter Series, including Turbine Type Flow Meter, OGM Type Flow Meter, Mechanical Flow Meter, Electronic Oval Gear Flow Meter, etc; Fuel Pump Series, including AC/DC self-priming Pump, Electronic Fuel Transfer Pump, Fuel Transfer pump Assy; Fuel Dispenser Series, including Mobile Fuel Dispenser, Mechanical Portable Fuel Dispenser and there fuel dispenser components. 

As one of the best quality and professional manufacturer in petrol equipment field, Jiahao has got international ATEX certificate and quality management system certificate ISO9001:2008. Based on the advanced equipment ,abundant technique and modernized management , we have established a line of research, development and sufficient production capacity . We have a experienced team of workers and excellent QC numbers who can strictly control each step of production process , all of these make our quality reliable and in good quality. Jiahao's products are exported to many countries, such as South East Asia, Middle East, Europea, Russia, USA, etc. Customers' OEM&ODM requirements are available for us. 


FAQ: 

Q: Are you a manufacture or a trading company?
A: We are a manufacture of kinds of fuel nozzle, adblue nozzle, flow meter, fuel pump&other fuel dispenser accessaries.

Q: Where is your factory located? How can I visit there? 
A: Our factory is located in Wenzhou, Zhejiang, China. All our clients, from home or abroad, are warmly welcomed to visit us!

Q: Can I get some samples? Could be 1 pc sample free?
A: We are honored to offer you samples for test. Sample fee of 1pc still needs to be collected, but could be deducted in the future order.

Q: How does your factory do quality control? 
A: Quality is priority. Each of our product will be inspected strictly by our prefessional workers before delivering. We have got ISO9001:2008 certificate and SGS certificate.

Q: What's your delivery time?
A: It depends on your quantity, usually 3-7 days. 

Q: What kind of certificate do you have?
A: ISO 9001:2008&Atex certificate. 



Please kindly click below for more information.(inquiry) Why not!

Weld Materials

1.Welding materials

In Welding, substances called filler materials or consumables are used. As the name implies, these substances provide filler or a body of molten materials that provides a strong bond to be formed between the base metals used. Most welding processes will also require some form of shielding to protect both the main components and filler from being oxidized during the process.

The type of welding materials used during welding depends on the nature of the job intended. Electrodes draw the necessary energy in order to perform welding applications. Luoyang Golden Egret Company has any kind of welding materials include CTC Welding Rod /rope, SCTC welding rod/rope, TC electronic welding rod, Ni-based welding rod, flux-cored Welding Wires, solid welding wires and etc.

Welding can be applied in different kinds of industries such as building and construction, oil and gas, marine, power generation, steel, mine tools, automobile, transportation and etc.

2. Welding rod

1)Cast tungsten carbide based tubular rod

The hard phase of the rod is cast tungsten carbide which leads to higher hardness and better wear-resistance.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65

Mainly used for Mining machinery, Geological tools, Petroleum drilling tools etc, by Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GT1103 (CTC, 60-80 mesh),

GT1103-1(CTC, 20-30 um),

GT1103-2(CTC, 40-60 um)

2)The hard phase of tube rod is carbide pellets which leads to higher impact resistance and better wear resistance than CTC cloase rod.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65 wear test.

Mainly used for mining machinery. Geological tools etc; by Oxy-acetylene with weak carburizing flame.

Product recommendation:

GT2102 (Cemented carbide grit, 30-60mesh)

GT2102-2(Cemented carbide grit, 30-40mesh)

GT2102-3(Cemented carbide grit, 40-60mesh)

3)Tube rod is composited by Cemented carbide pellets, Spherical CTC and CTC. The layer has higher impact resistance, better wear resistance and good fluidity than other rods.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65.

Mainly used for oil method drill bits, such as Tri-cone bit, Steel tooth bit, PDC bit, etc. By Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GT3302 (carbide pellets, 20-40mesh)

GT3302-1(carbide pellets, 14-40um)

4)The hard phase of the rod is monocrystal WC, the welding layer has a higher wear resistance and better impact resistance.

The wear resistance is 6-7 times better than others, tested by ASTM G65 method.

Mainly used for the repair and strength for oil drills bits, such as PDC bit diameter holding by Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GT4104 (Monocrystal WC, 80-200mesh)

3. Welding Rope

Made form mixture of CTC and self-fluxing nickel alloy covering on nickel wire. The CTC is in spherical or irregular with good wear resistance; the nickel alloy is in spherical or nearly spherical shape with good wettability and erosion resistance and better corrosion resistance than tubular rod.

Recommend to use Petroleum drilling tools, Concrete mixing blade, Mud pump, Coal sluice, Coal drill pipe, Tunnel drilling machinery etc.

By Oxy-Acetylene Welding with weak carburizing flame.

Product recommendation:

GS110450N (CTC, 4mm, HRC 47-55)

GS110550N (CTC, 5mm, HRC 47-55)

GS110650N (CTC, 6mm, HRC 47-55)

4. Welding Bar

The rod is sintered by CTC and Ni-based powders. The CTC(Cast Tungsten Carbide) is in irregular or spherical shape with better wear resistance and the nickel alloy is in spherical or nearly spherical shape and has good wettability with cast tungsten carbide. The cladding layer has a higher impact resistance and better wear resistance.

Its wear resistance and corrosion resistance is between tube rod and flexible rope.

Mainly used on the Steel PDC bit, Concrete mixer blade, Mud pump, Miner chute, Miner drill stem and Mechanical parts of Tunnel rock drill machine etc.

Welded by Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GD4025253-3(CTC, SCTC, 4*600/6*600)

GD4030303-3(CTC, SCTC, 4*600/6*600)

5. Welding wire

Intensified molybdenum titanium vanadium composite chromium carbide welding wire can improve layer`s bonding strength and tenacity. This wire can use for multilayer welding which has no peel off, and it can maintain good wear resistance under certain impact working condition.

Product recommendation:GSQD671Mo-4(1.6mm)

Medium carbon and high chromium wear resistance welding wire has a higher hardness, stronger wear resistance, and excellent toughness by adding a certain amount of molybdenum alloys and boride. It has a better impact resistance and strip resistance than high chromium cast iron type materials

Product recommendation: GSQD621Mo-4(1.6mm)

6. Tungsten Carbide Pellets

With high sphericity & excellent alloy organization, cemented carbide pellet is mainly used in welding, as an adding material of PTA Powder , tubular welding rod, to improve the wear resistance of the workpieces greatly.

Product recommendation: GQ06

7. Tungsten Carbide Grits

Cemented carbide grit with different percent of cobalt has good abrasive resistance and is widely used for making grinding, polishing and cutting tools.

Product recommendation: GS08A

Weld Materials,Tubular Welding Rod,Welding Electrodes,Stainless Steel Welding Rod

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcthermalspray.com