Domestic Electric Copper Wire Self-Priming Booster Pump with Brass Insert

   Domestic Electric Copper Wire Self-priming Booster Pump with Brass Insert

Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel

Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel

Working Range
>> Liquid: clean liquids without  suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44

Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time. 
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>> The flow priority system, electric pump use acme, turely achieve the full pressure. 

Application

                                                                     
                                                      About Us
                                  


FAQ    Domestic Electric Copper Wire Self-priming Booster Pump with Brass Insert

Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel

Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel

Working Range
>> Liquid: clean liquids without  suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44

Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time. 
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>> The flow priority system, electric pump use acme, turely achieve the full pressure. 

Application

                                                                     
                                                      About Us
                                  


FAQ

CPE 135A

Chlorinated polyethylene is a saturated polymer material with a white powder appearance. It is non-toxic and tasteless. It has excellent weather resistance, ozone resistance, chemical resistance and aging resistance. It has good oil resistance, flame retardancy and coloring properties. It is an excellent impact modifier for PVC plastics and a synthetic rubber with good comprehensive performance. It has a very wide range of applications and has been widely used in cables, wires, hoses, tapes, rubber and plastic products, sealing materials, flame retardant transport belt , Waterproof coiled material, film and various profiles and other products.

As a PVC impact modifier, CPE135A has many advantages such as low price, excellent performance, and excellent aging resistance, but it has certain disadvantages in the use of high impact and high hardness products and low temperature resistant products CPE135A. For example, in the formulation of rigid PVC, a large amount of CPE will reduce the hardness and rigidity, which reduces the physical properties of the product; in addition, when the low temperature resistance requirement of PVC products exceeds minus 30°C, CPE135A cannot meet the requirements. Under normal circumstances, modified CPE, such as ACM, RGC135A, etc., can be selected for rigidity and hardness improvement; for low-temperature resistance modification, impact-resistant ACR or other impact modifiers with lower glass transition temperature can be selected.

CPE 135A,Cpe-135a,Cpe 135a Impact Modifier,Impact Modifier

Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbpolymer.com