Single Pump Cementing Truck Made by Serva Sjs

1. .Overview
PCT-511B system is a truck-mounted single pump cementing unit with TPH400 plunger pump. Standard configuration should be equipped with North Benz 2535A 6X6 chassis.
The input shaft of TPH400 pump is paralleled with centre line of engine, so the fluid end is located at the rear of unit. This inline installation feature makes the maintenance and service of pumps easier.Compared with other cementing plunger pumps with same plunger size, TPH400 pump has features of maximum operation pressure, long stroke and high self-priming capacity.
2. General specification
Max. working pressure 76.2Mpa (11,200Psi W/ 4 1/2" fluid end)
Max. flow: 1.50m³/min
Density range: 1.3-2.5g/cm³
Auto control precision: ±0.02 g/cm³
Mixing capacity: 0.3-2.3m³/min
Working ambient temperature: -20°C - 50°C
Overall dimension (mm): 9700(L) x 2500(W) x 4200 (H)
Net weight: 24000kg

3. Features
      • 1m³ surge tank avalible, utilized to make bulk cement delivery more stable so as to improve the accuracy of auto control system and slurry quality.

• The mixing power is partially supplied by chassis engine which increases the actual operation power of deck engine.
• TPH400 inline installation, makes the maintenance and service of pumps easier.

• High energy recirculating jet mixing system.

• Off-center dry cement valve avoids bulk cement from choking.
• Emergency kill system of air inlet shutoff.
• SPS non-leakage packing system
• Plunger pump overpressure protection system.
• F300 Non-radioactive densitometer is easy to wash, safe and reliable.
• Simplify operation, adapts to working habits in oilfield.
• 10" operation screen, convenient to monitor the working data.
• Portable wireless/ wired data acquisition system.

Diesel fired coolant pre-heat system available. The heater allows the engine to be preheated before starting without the use of external power. 1. .Overview
PCT-511B system is a truck-mounted single pump cementing unit with TPH400 plunger pump. Standard configuration should be equipped with North Benz 2535A 6X6 chassis.
The input shaft of TPH400 pump is paralleled with centre line of engine, so the fluid end is located at the rear of unit. This inline installation feature makes the maintenance and service of pumps easier.Compared with other cementing plunger pumps with same plunger size, TPH400 pump has features of maximum operation pressure, long stroke and high self-priming capacity.
2. General specification
Max. working pressure 76.2Mpa (11,200Psi W/ 4 1/2" fluid end)
Max. flow: 1.50m³/min
Density range: 1.3-2.5g/cm³
Auto control precision: ±0.02 g/cm³
Mixing capacity: 0.3-2.3m³/min
Working ambient temperature: -20°C - 50°C
Overall dimension (mm): 9700(L) x 2500(W) x 4200 (H)
Net weight: 24000kg

3. Features
      • 1m³ surge tank avalible, utilized to make bulk cement delivery more stable so as to improve the accuracy of auto control system and slurry quality.

• The mixing power is partially supplied by chassis engine which increases the actual operation power of deck engine.
• TPH400 inline installation, makes the maintenance and service of pumps easier.

• High energy recirculating jet mixing system.

• Off-center dry cement valve avoids bulk cement from choking.
• Emergency kill system of air inlet shutoff.
• SPS non-leakage packing system
• Plunger pump overpressure protection system.
• F300 Non-radioactive densitometer is easy to wash, safe and reliable.
• Simplify operation, adapts to working habits in oilfield.
• 10" operation screen, convenient to monitor the working data.
• Portable wireless/ wired data acquisition system.

Diesel fired coolant pre-heat system available. The heater allows the engine to be preheated before starting without the use of external power.

Grooving And Chamfering Machines

Grooving And Chamfering Machines,Chamfering Machines,Chamfering And Slotting Machine,Block Chamfering And Grooving Machine

Pujiang Longhui Machinery Co., LTD. , https://www.longhuimachinery.com