Jaw crusher equipment is still used in various gravel lines

We can find that there are still jaw crusher equipments in the production of sand and gravel lines . It can be seen that the jaw crusher is still an optional equipment equipped with artificial gravel lines.

Jaw crusher equipment is widely used in the production line, but any equipment in the use process, there are certain requirements for the use of conditions and the environment, Jiangtai Heavy Industry based on years of experience summed up the requirements of the use of jaw crusher equipment environment , I hope to help our customers efficiently use jaw crusher equipment.

Jaw crusher's fixed liner, dynamic liner, both sides of the liner is easy to wear. After severe wear, the particle size of the product becomes larger. The initial wear can be used to turn the tooth plate, or up and down two turn around. The wear of the seesaw is mostly in the lower middle. When the tooth height wears out 3/5 , it is necessary to replace the new liner with the root. When the two side liners wear out 2/5 , they also need to be replaced with new ones.

Jaw crusher in the assembly, the crush plate must be firmly attached to the jaw plate, between the two should be flat, between the crush plate and the jaw plate using soft metal as a gasket, and tighten with bolts. When the crusher is working, the crush plate should not be loose, otherwise it is easy to break or Wear crush plates to reduce the life of the crush plate. Therefore, the crush plate must be installed during assembly to extend the service life of the crush plate.

This article by the Jiangtai heavy crusher equipment prices , sand machine equipment manufacturers edit, Zhengzhou Jiangtai Heavy Industry specializing in the production of high-efficiency energy-saving sand machine, new sand machine, impact crusher, impact crusher and so on.