Four-point problem solution for garbage trucks

First, the engine is difficult to start
1, cold start difficult, start after the vibration, vibration at low speed. It may be spark plug failure or ignition timing is too early. It is advisable to go to the nearest service station for overhaul.

2. It is difficult to start when the temperature is low in winter. The main reasons are: low temperature, low gasification rate of fuel; difficulty in starting the mixer due to thinning and non-flammability; large viscosity of the lubricating oil, increased engine operating resistance and difficulty in starting; the chemical reaction of the battery electrolyte is slow, resulting in start-up Insufficient power output, insufficient starter power, and insufficient ignition voltage make it difficult to start the engine.
Garbage trucks should warm up the engine before starting in the cold season to avoid difficulties in starting at low temperatures in winter.

Second, engine lubrication
1. Lubricant pressure indicator lights up when accelerating. Indicates that the lubricating oil pressure is too low. This may be due to filter plugging, low lubricant, pump failure, and other causes. It is advisable to go to the nearest service station for overhaul. Or the lube oil pressure indicator system has malfunctioned and the indicator light has been lit incorrectly. It is advisable to go to the nearest service station for overhaul.

2, excessive consumption of lubricants. Lubricants have normal consumption in a good condition, but when the vehicle is in poor condition, the exhaust color of the vehicle is blue. This means that the consumption of lubricant oil is too large. The main reason for the consumption of lubricant oil is to enter the combustion chamber to participate in combustion. Or oil leaks. It is advisable to promptly approach the service station for overhaul.
Third, the generator is unstable
1. The throttle body of the engine is dirty or sloppy. When the throttle valve and the idle valve of the engine valve body are heavily fouled, the engine will experience idling too low, poor stability, or no idle, and the throttle valve will be stuck when refueling. It is generally advisable to clean the throttle body whenever the vehicle is about 20,000 kilometers. After cleaning, it should be set up through the diagnostic device to make it work normally.

2, the engine jitter is serious, the fault indicator will occasionally shine. The reason is that unclean fuel has caused contamination or clogging of the oil supply system. The use of dirty fuel can cause fuel supply, ignition, and emissions system contamination, which in turn can cause engine fault indicators to light up and varying degrees of engine vibration.

The solution is to thoroughly clean the contaminated system, continue to add stable gasoline, and add a fixed amount of oil cleaner.
Fourth, engine exhaust color.

1, garbage truck exhaust color blue. In the garbage truck, a large amount of lubricating oil enters the cylinder and can't complete the combustion; sometimes the engine cold starts to emit blue smoke, but when the car is hot, it's okay. It is advisable to go to the 4S store for maintenance.

2. Garbage exhaust color is black. Due to incomplete combustion of fuel. It will cause a drop in power and economic deterioration. It is recommended to go to the 4S shop for maintenance.

3. Garbage trucks are white in color, severe when they are cold, and do not emit white smoke after hot cars. This is because gasoline contains water, and the engine is too cold. At this time, the fuel entering the cylinder is not completely burned, resulting in fog or water vapor generating white smoke. In the winter or rainy season, white smoke is often seen when the car is first started. Once the engine temperature increases, white smoke will increase. This state does not require maintenance.
Garbage truck manufacturer tips: If there is a problem during the journey of the garbage truck, you should contact the Dongfeng service station to provide repairs.

2 ton sitting on electric reach truck

Zowell FRB20 model sitting on Electric Reach Truck is standard with side shift function. It is an industrial material handling equipment, which refers to the forward moving wheel type vehicle which carries out loading and unloading, stacking and short distance transportation of the good by pallets.

There are also many options like camera and monitor, EPS function, AGV modification, height preselection function etc. The sitting on electric reach truck is a high performance truck with perfect performance and excellent safety.

What's more, it is equipped with intelligent system, American Curtis controller system, double AC system ensure its flexible operation in the big warehouse.

Detail features

1. Wider area for the leg
The legroom of the operating position is ample, allowing the operator to move flexibly. They will feel comfortable without worrying about being cramped.

2. Sitting type operation
The seat is adjustable. The soft seat can relieve fatigue and provide a safe and comfortable driving experience for operators.

3. Design of low center of gravity
The design of low center of gravity can ensure stability of the truck so that it is anti-overturning even in complex working conditions.

4. height-limited lifting

5. Turning speed limiting device
The precise high speed limiting turning control technology can prevent side overturning, thus protecting the goods from dropping.

6. Good lifting ability
The max lifting height is 9000mm which can meet the requirements of goods stacking in certain height.

7. Front moving function
The fork can move forward for 590cm,which can reduce turning radius of the truck as well as ensure running stability.

8. Small turning radius

This reach truck has a small turning radius which is only 1700mm. It can move flexibly even in very tight warehouse and workshop areas.

9. Tilt forward and backward

The fork can tilt forward and backward for easy loading and unloading of goods and material, thus improving the transporting stability of the reach truck.

10. Forged fork
The width of the fork can be adjusted within the range of 200-760mm. It is suitable for working conditions with both single side pallets and double side pallets.

Reach Truck,Reach Truck Forklift,Electric sitting on Forklift,Hyster reach truck

Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklift.com