Chain link fence machine introduction:
Automatic Chain Link Fence (Rabitz) Machine was made for the manufacture of woven mesh "Rabitz". It allows you to produce a mesh with the cell sizes from 20 mm up to 60 mm. However, the width of roll can be up to 2-meter also winding of big roll is automatic. The weaving of mesh goes by using one cable of wire, what makes the process of adjustment of work very simple. You can use different types of wire with deviations from the operating standards. The production of mesh roll is controlled automatically by a microprocessor which is very simple to use.
| This machine for the chain link fence production has a system of continuous circulation of the lubricating and cooling liquid (LCL). |
As a result of this process, machine tool life increases from 8000 of rolls to 1000 from the one matrix-set.
Automatic shutdown in case of wire seizing, simple control, and reliable operation allows one employee to serve two and more machines at the same time.
(1). Machine can do the Specification
|
Chain link fence | |||
|
Wire dia |
13-12Guage(2.4--2.7mm) |
12-11Guage(2.7--2.9mm0 |
11Guage (3.0mm) |
|
Opening |
40*40mm;50*50mm;60*60mm |
||
|
Application |
Economy |
Standard residential |
Light commercial |
|
Coating |
Galvanized before weaving |
Galvanized before coating |
200g/m2 |
|
Height |
36''---157''(0.9--4.0m) |
||
|
Selvage |
Knuckle and knuckle and barbed (wire dia2.5mm) |
||
|
Standard roll |
50m per roll |
||
 Â
Certification:ISO9001,CE,SGS.
Main Prodcuts:Chain Link Fence, Galvanized chain link fence ,PVC chain link fence,fence.
Main Market:Poland,Russia,Crotia,Hungary,Italy,Germany,etc Europe Countries.Austrilia,NewÂ
Zealand,Canada.
The dryer is a kind of mechanical equipment that uses heat energy to reduce the moisture content of materials. It is used to stop the drying operation of objects and vaporize the moisture (usually moisture or other volatile liquid components) in the materials after heating to obtain solid materials with regular moisture content. The purpose of drying is to meet the requirements of material application or further processing.
The future development of dryers will develop and improve dryers under the conditions of deepening the study of drying mechanism and material drying characteristics, and controlling the operation conditions of different materials; In addition, large-scale, high strength, high economy, and improved compliance with raw materials and quality are the fundamental trends of dryer development. Now let's introduce the function, working principle, classification, operating procedures, selection instructions and cleaning methods of the dryer.
The dryer acts as a refrigeration compressor to suck the low pressure (low temperature) refrigerant in the evaporator into the compressor cylinder. The refrigerant steam is compressed, and the pressure and temperature rise at the same time; The refrigerant steam with high pressure and high temperature is pressed to the condenser. In the condenser, the refrigerant steam with higher temperature and cooling water or air with lower temperature stop heat exchange.
The heat of the refrigerant is taken away by water or air and condensed, and the refrigerant vapor becomes liquid. This local liquid is then sent to the contraction valve, which is throttled into a low temperature and low pressure liquid and enters the evaporator; The low temperature and low pressure refrigerant liquid in the evaporator absorbs the heat of the compressed air and vaporizes (commonly known as "evaporation"), while the compressed air condenses a large amount of liquid water after cooling; The refrigerant steam in the evaporator is sucked away by the compressor.
Hopper Dryer,Used Hopper Dryer,Dehumidifying Hopper Dryer,container Hopper Dryer
Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachinery.com