Industry Mold Temperature Regulator for Extrusion Industry

Model NO.: MPR-50-36
Heating Capacity: 36kw (Adjustable)
Pump Flow Rate: 16m³/H
Heat Source: Water
Control Mode: Board Self-Optimized Microprocessor
Emp. Control Accuracy: Within +/- 1ºC
Cooling Method: Direct Heating (Direct Cooling)
Safety Protection: 9 Ways
Lifetime: More Than 5 Years
Application: Plastic Injection, Extruder, Blowing Machine
Trademark: MAIPT
Transport Package: Wooden Case as Usual
Specification: 1200*420*1000
Origin: China
HS Code: 8419899090
Industry Mold Temperature Regulator for Extrusion Industry
 
 BRIEF DESCRIPTION WWW.MAIPT.LTD/
 
Mold Temperature Control Units(TCU) PID process controller are used to preheat a process to the desired operating temperature by engaging the unit's electric immersion heater and recirculating the oil in the system. Water type TCU circulate high temperature heat transfer fluid through the process application for temperature control.

MPR series TCU is pecially engineered for the temperature control of Rubber & Plastic industry. This series are highly customizable, has special forced cooling function with high-strength cooling capacity.

MPR series TCU offer the temperature range from 15°C to 98 °C, customized heating capacity and voltages are available.
Industry Mold Temperature Regulator for Extrusion Industry
 FEATURES / FUNCTIONS / SAFETY PROTECTIONS WWW.MAIPT.LTD/
 
  BASIC FUNCTIONS * OPTIONAL FUNCTIONS
- Thermometer for return water   * Control mode: PLC
- Switchover of heating power   * Explosion-proof device
- Automatic air-exhausting after startup   * RS485 remote control function
- Control mode: Microcomputer control   * Air-blowing and return water function
- BY-PASS pressure release loop for hot water   * Customizable multi-point Temperature unit
- SUS integrated pipelines for less pipe resistance   * Customizable horse power and heating power for water pump
- System pressure & Functional test before shipping    
  SAFETY PROTECTIONS                                                   
  Temperature anomaly                                    →  Alarm and cut off power, when cycle-water's Temp. exceed upper limit.
  Power reverse                                              →  Power supply phase detection to prevent pump reverse, alarm indication.
  Pump overload →  Thermal overload relay protect pump from overloading, alarm indication.
  Low water protection →  Level-switch detects the oil level, prevent low water and alarm indication.
  Pressure anomaly →  Automatic stop heating operation when system pressure anomaly.
  Anomaly heating →  Heating contactor working, and anomaly heating alarm indication.
  Pipe blockage →  BY-PASS pressure release loop to protect pump.
  Air exhaust Function →  Automatic air-exhausting after startup.
  Short circuit →  Air-break switch - releasing.
 
 DETAILS SHOW WWW.MAIPT.LTD/
Industry Mold Temperature Regulator for Extrusion Industry
 TECHNICAL SPECIFICATION WWW.MAIPT.LTD/

Specification Table for MPR Series
Model Heating Capacity Pump Data Pipe Connecting Approx. Dimention
Power Flow Lift Inlet Outlet Weight L*W*H
KW BTU/Hr KW L/min m DN DN KG mm
MPR-30-36 36 122,868 2.2 150 22 25 25 180 1150*420*1000
MPR-30-60 60 204,780 2.2 150 22 25 25 220 1350*500*1150
MPR-30-80 80 273,040 2.2 150 22 25 25 240 1350*500*1150
MPR-50-24 24 81,912 3.75 250 30 32 32 130 1150*420*1000
MPR-50-36 36 122,868 3.75 250 30 32 32 185 1150*420*1000
MPR-50-60 60 204,780 3.75 250 30 32 32 220 1350*500*1150
MPR-50-80 80 273,040 3.75 250 40 100 100 240 1570*550*1250
MPR-75-36 36 122,868 5.5 300 49 50 50 185 1570*550*1350
MPR-75-60 60 204,780 5.5 300 49 50 50 225 1570*550*1350
MPR-75-80 80 273,040 5.5 300 49 50 50 245 1570*550*1350
MPR-75-120 120 409,560 5.5 300 49 50 50 265 1570*550*1350
MPR-100-60 60 204,780 7.5 466.7 59 50 50 230 1600*600*1500
MPR-100-80 80 273,040 7.5 466.7 59 50 50 280 1600*600*1500
MPR-100-120 120 409,560 7.5 466.7 59 50 50 320 1600*600*1500
MPR-100-225 225 767,925 7.5 466.7HDX Sheep Tag

Here is LF Sheep Tag For Farm Sheep and Goat . This LF Sheep Tag is ISO standard and can be used together with any other device that conform to same ISO rule.

1. Compact and light weight

2. 134.2Khz RFID chip inside, ISO11784/5 standard

3. Long validity period

4. Laser printing

5. CE,RoHs,ISO9001 certified

6.White and Yellow two options

20210721165216

8 12 11

Wuxi FOFIA was founded in 2002 in Jiangsu, We develop and manufacture a large range of animal ID products including injectable microchips,Animal temperature microchips, LF ear tags, UHF ear tags ,visual ear tags and all kinds of RFID readers. We provide complete hardware solutions for animal husbandry in various countries around the world.
Our products can used for cattle, sheep, goat, pig, fish, pets and wild animals and we have exported to more than 90 countries during the past 20 years.
FOFIA has won a good reputation with our high-quality products, fast delivery time and excellent after-sales service. We do our own brand and also we welcome all kinds of OEM.
We have skilled workers, fully automated production lines and a professional technical team. Welcome customers all over the world to come to us to discuss cooperation, we will provide you with a satisfactory solution.

HDX Sheep Tag, ICAR sheep tag, Sheep ID management

Wuxi FOFIA Technology Co.,Ltd. , https://www.fofiatag.com