Wireless WIFI coverage: AP+AC coverage considerations

Wireless AP+AC is a type of wireless AP. It is the most widely used type of wireless network. Whether it is an enterprise or a wireless network in a hotel or other places, the wireless AP + AC networking mode is basically adopted. The following notes on the installation of wireless AP+AC share with you.
Smart Wireless Coverage
A P +A C wireless coverage
AP+AC coverage notes:
1. Do not use the same channel for adjacent APs. It is better to have more than 5 channels in the middle. Each working channel basically occupies a bandwidth of about 5 channels. Therefore, to be spaced apart, it is best to use 1, 6, and 11 This interval.
2. It is best to ensure that the overlap rate of neighboring APs is about 20%. In this way, when two APs switch between them, the basic feeling does not come out!
3, when the user's signal strength is within -70dbm, the Internet experience is the most jia, -70dbm to -85dbm, the experience is generally like, -85dbm or more, the probability of a dropped connection is great! Parameters can be tested with a spectrum analyzer or Android WIFI analyzer software!
4, on the SSID problem, many people like to use the Chinese name, because some mobile phones or systems due to coding problems, Chinese prone to garbled problems, although the probability of this situation has been very small, but it is recommended that you use the English name. If it is AC+AP mode, it is recommended to set a Chinese name and an English name. If you do not support multiple SSIDs, you are recommended to use English names!

Active Magnesium Oxide

Active Magnesium Oxide, MgO, relative molecular weight 40.30. Its chemical composition, physical morphology and other indicators are not much different from ordinary magnesium oxide, but some indicators of active magnesium oxide and ordinary magnesium oxide requirements are different; For suitable particle size distribution, average particle size :< Including 2 m (2000 nm); The micromorphology is irregular particles or nearly spherical particles or flake crystal. The activity measured by citric acid (CAA) ranged from 12 to 25s(the lower the CAA value, the higher the activity). The activity indicated by iodine absorption value ranged from 80 to 120(MGI2/100GmGo). The specific surface is between 5~20m3/g and apparent volume is between 6~8.5mL/g.

Active Magnesium Oxide,Wire Magnesium Oxide,Flame Retardant Magnesium Oxide,Modified Rubber Magnesium Oxide

FENGCHENG JINDE MAGNESIUM CO., LTD , https://www.brucitemagnesium.com