 
ESD5500E Speed Controller Unit For Diesel Alternator
Speed Controller ESD5500E
The Generator Speed Controller ESD5500E Series Speed Control Unit is rugged enough to be placed in a control cabinet or engine mounted enclosure with other dedicated control equipment. If water, mist, or condensation may come in contact with controller, it should be mounted vertically. This will allow the fluid to drain away from the speed control unit.
TECHNICAL SPECIFICATIONS of ESD5500/ ESD5500E:Â
Isochronous Operation/Steady State Stability:± 0.25% or better  Â
Speed Range/Governor:1K-7.5K Hz continuousÂ
Speed Drift with Temperature:± 1% Maximun Â
IDLE Adjustment:160 ± 20Hz  --60% of set speed Â
Droop adjustment Min.(K-L Jumpered):15Hz. ± 6Hz. per 1.0 A change  Â
Droop adjustment Max.(K-L Jumpered):400Hz. ± 75Hz. per 1.0 A change Â
Droop Adj. Max. (K-L Jumpered):75Hz., ± 75Hz. per 1.0 A change Â
Droop Adj. Min. (K-L Jumpered):15Hz., ± 6Hz. per 1.0 A change Â
Speed Trim Range:± 200HzÂ
Remote Variable Speed Range:500 -7.5Hz. or any part thereofÂ
Terminal Sensitivity:J: 100Hz., ± 15Hz/Volt @ 5.0 K Impedance Â
           L: 735Hz., ± 60Hz/Volt @ 65 K Impedance Â
           N: 148Hz., ± 10Hz/Volt @ 1Meg. Impedance Â
           P: 10V DC Provide @ 20ma Max.Â
Speed Switch Adjustment Range:1000-10000HzÂ
ENVIRONMENTAL:
Ambient Operating Temperature Range: -40 celsius to +85 celsiusÂ
Relative Humidity:up to 95% Â
Storage Temperature :-55 celsius to90 celsiusÂ
Shock :20-100HZ 500mm/Sec.Â
Â
INPUT POWER:Â
Provide :12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)Â
Â
Polarity:Negative Ground(Case Isolated) Â
Power Consumption:50mA continuous plus actuator currentÂ
Actuator Current Range @ 25 celsius-(Inductive Load):Min. 2.5 Amps, Max. 10 Amps continuousÂ
Speed Sensor Signal:0.5-120 V RMSÂ
Speed Switch Relay Contacts(N.O.and N.C.):10AmpÂ
Â
Note: The performance parameters in the frequency when measuring 4000Hz
We supply the following generator receplacement alternator AVR and spare parts.
Stamford    SX460 SX440 AS440 SX480 AS480 MX321 MX341 MX450
Leroy Somer  R220 R230 R250 R438 R450 R448 R449
MARATHON Â SE350
MECCALTE Â Â SR7 UVR6
MARELLI Â Â Â M16FA655A M40FA640A
BASLER Â Â Â Â VR6 AEC42-7 AVC63-2-5 AVC63-4A AVC63-7 AVC110-6
Normal    6A 8A 10A 12A 15A 20A EA05A EA04C EA16A WT-2 WT-3 701 703 704
Speed Controller  Sensor Indicator Rectifier and so on alternator spare parts
We also provide design service for customers' demands.
We supply all kinds of generator AVRÂ and Spare Parts.
We suplly all kinds of Alternator AVR and Spare Parts.
High Quality ,Best Service
We are waiting for your enquiry.
Contact information
168F 188F 152F 154F EC2500 EC6500 ET950 ET2600 ET6600 EF2600 EF6600 EY20 EY28 170F178F 186F generator spare parts connecting rod piston assembly piston ring recoil starter assembly carburetor gasket kit crankshaft camshaft fuel cock avr oil alert intake exhaust valve drum wheel electric start kit fuel tank motor armature bearing pawling spring governor gear set starter handle string fuel tank cap back spring rocker arm assembly high voltage set ignition coil ignitor cooling motor fan spark plug socket air filter push rod air filter element starter pulley crank case cover cylinder head gasket oil gauge valve lifter muffler governor arm shaft cylinder head fan case front panel volmeter capacitor circuit breaker receptacle fly wheel armature fan crank case stop switch slip ring rotor stator fuel meter carbon brush shockproof foot plate bearing battery charger sx460 sx440 sx480 as440 mx321 mx341 mx450 r230 r220 r250 r438 r450 r448 r449 se350 sr7 uvr6 wt-2 wt-3 3a 8a 10a 12a 15a 20a 701 703 704 AVR
Â
ESD5500E Speed Controller Unit For Diesel Alternator
Speed Controller ESD5500E
The Generator Speed Controller ESD5500E Series Speed Control Unit is rugged enough to be placed in a control cabinet or engine mounted enclosure with other dedicated control equipment. If water, mist, or condensation may come in contact with controller, it should be mounted vertically. This will allow the fluid to drain away from the speed control unit.
TECHNICAL SPECIFICATIONS of ESD5500/ ESD5500E:Â
Isochronous Operation/Steady State Stability:± 0.25% or better  Â
Speed Range/Governor:1K-7.5K Hz continuousÂ
Speed Drift with Temperature:± 1% Maximun Â
IDLE Adjustment:160 ± 20Hz  --60% of set speed Â
Droop adjustment Min.(K-L Jumpered):15Hz. ± 6Hz. per 1.0 A change  Â
Droop adjustment Max.(K-L Jumpered):400Hz. ± 75Hz. per 1.0 A change Â
Droop Adj. Max. (K-L Jumpered):75Hz., ± 75Hz. per 1.0 A change Â
Droop Adj. Min. (K-L Jumpered):15Hz., ± 6Hz. per 1.0 A change Â
Speed Trim Range:± 200HzÂ
Remote Variable Speed Range:500 -7.5Hz. or any part thereofÂ
Terminal Sensitivity:J: 100Hz., ± 15Hz/Volt @ 5.0 K Impedance Â
           L: 735Hz., ± 60Hz/Volt @ 65 K Impedance Â
           N: 148Hz., ± 10Hz/Volt @ 1Meg. Impedance Â
           P: 10V DC Provide @ 20ma Max.Â
Speed Switch Adjustment Range:1000-10000HzÂ
ENVIRONMENTAL:
Ambient Operating Temperature Range: -40 celsius to +85 celsiusÂ
Relative Humidity:up to 95% Â
Storage Temperature :-55 celsius to90 celsiusÂ
Shock :20-100HZ 500mm/Sec.Â
Â
INPUT POWER:Â
Provide :12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)Â
Â
Polarity:Negative Ground(Case Isolated) Â
Power Consumption:50mA continuous plus actuator currentÂ
Actuator Current Range @ 25 celsius-(Inductive Load):Min. 2.5 Amps, Max. 10 Amps continuousÂ
Speed Sensor Signal:0.5-120 V RMSÂ
Speed Switch Relay Contacts(N.O.and N.C.):10AmpÂ
Â
Note: The performance parameters in the frequency when measuring 4000Hz
We supply the following generator receplacement alternator AVR and spare parts.
Stamford    SX460 SX440 AS440 SX480 AS480 MX321 MX341 MX450
Leroy Somer  R220 R230 R250 R438 R450 R448 R449
MARATHON Â SE350
MECCALTE Â Â SR7 UVR6
MARELLI Â Â Â M16FA655A M40FA640A
BASLER Â Â Â Â VR6 AEC42-7 AVC63-2-5 AVC63-4A AVC63-7 AVC110-6
Normal    6A 8A 10A 12A 15A 20A EA05A EA04C EA16A WT-2 WT-3 701 703 704
Speed Controller  Sensor Indicator Rectifier and so on alternator spare parts
We also provide design service for customers' demands.
We supply all kinds of generator AVRÂ and Spare Parts.
We suplly all kinds of Alternator AVR and Spare Parts.
High Quality ,Best Service
We are waiting for your enquiry.
Contact information
168F 188F 152F 154F EC2500 EC6500 ET950 ET2600 ET6600 EF2600 EF6600 EY20 EY28 170F178F 186F generator spare parts connecting rod piston assembly piston ring recoil starter assembly carburetor gasket kit crankshaft camshaft fuel cock avr oil alert intake exhaust valve drum wheel electric start kit fuel tank motor armature bearing pawling spring governor gear set starter handle string fuel tank cap back spring rocker arm assembly high voltage set ignition coil ignitor cooling motor fan spark plug socket air filter push rod air filter element starter pulley crank case cover cylinder head gasket oil gauge valve lifter muffler governor arm shaft cylinder head fan case front panel volmeter capacitor circuit breaker receptacle fly wheel armature fan crank case stop switch slip ring rotor stator fuel meter carbon brush shockproof foot plate bearing battery charger sx460 sx440 sx480 as440 mx321 mx341 mx450 r230 r220 r250 r438 r450 r448 r449 se350 sr7 uvr6 wt-2 wt-3 3a 8a 10a 12a 15a 20a 701 703 704 AVR
Hot stamping is a special Printing Process without ink, it is with certain pressure and temperature, arranged in a stamping machine using the template, to print and hot stamping foil pressed each other in a short period of time, metal foil or pigment foil according to stamping template by transfer to the surface by hot printing. Specification in terms of gilding refers to a certain temperature and pressure of anodized aluminum foil stamping (Tang Jinzhi) hot stamping to the substrate surface of the heat transfer printing process.
Hot Stamping Process,New Arrival Hot Stamping Process,Decoration Hot Stamping Process
Jin Yuan Kang Industry Co., Ltd. , http://www.jykplating.com