Radiative Heat Transfer Drying is the process by which the heat energy of the heating plate reaches the dry material. The key to this type of device is the radiant heat of the radiant heating plate and the wavelength that the selective material can easily absorb. For a long period of time, near-infrared wavelengths below 3μm have been used, but in recent years, far-infrared (greater than 4μm) ceramic heating plates with higher organic energy absorption have been used. Far infrared heating surface absorption is better, so as a coating film drying effect is better. Experiments show that most of the far-infrared energy can be absorbed by materials within 1 mm from the surface, and even if it is thick, uniform heat transfer is difficult to achieve.
Microwave drying has also been used in more and more applications in recent years. It uses microwaves as electromagnetic waves to directly enter the conductive body, causing polar molecules and polar groups in the material to vibrate and oscillate, and is internally generated by internal friction between molecules. Heat, to achieve the purpose of drying. This is a process in which electrical energy is converted into heat, and the thermal efficiency can reach 60% to 70%. The pure microwave drying operation is costly, but during deceleration drying, microwave drying can be used as an auxiliary means to increase the drying rate when the moisture is difficult to dry with hot air and conductive heat transfer is removed. In freeze drying, residual ice can also be removed by microwave drying.
(1) Far-infrared dryer.
The infrared rays generated by the electric energy will have the effect of absorbing penetration from the surface to the inside. Therefore, the drying rate is higher and the thermal efficiency is also higher. However, its nature is the same as that of light, so no shadow can be left when it is irradiated.
(2) High-frequency dryer.
When the material is placed in a high-frequency, high-voltage electric field, uniform frictional heat is generated within the material as the water molecules move. This method is suitable for thick plates and materials with poor thermal conductivity, mainly used in the wood processing industry.
(3) Ultrasonic dryer.
The sound wave hits the material with the appropriate frequency, and the cavitation effect is fully exerted with the intense molecular motion, which accelerates the drying rate and is suitable for the drying of heat-labile materials.
Jump Machinery (Shanghai) Limited is a modern high-tech joint stock enterprise specialized in the turnkey production line of concentrated juice, jam, pulp, tropical fruits, herb and tea beverages, carbonated drinks, wine, beer, yogurt, cheese, milk, butter etc. At the same time, Jump is also committed to manufacturing various food machinery, such as Can Food Machinery, Fruits Juice Machinery, Tomato Sauce Machinery, Fruits Jam Machinery, Dairy Machinery etc.
Jump is able to supply service from A to Z about your project, not only machine manufacturing, installation commissioning, technical training, after-sales service, but also before-sales service, including factory building construction drawings, facilities layout, and water, electricity, boiler steam. Jump has a professional team to help clients to design the layout on worksite and draft the implementation plan, program schedule and expense estimation in each stage of the project until the production line starts the project.
As an industry leader, it has the best projects, professional engineers and technicians, strong R&D department with a number of masters and PhD of food engineering & packaging machinery, stable long-term development and highly rated customer experience in every province in China and also in Africa, the Middle East, Southeast Asia, Oceania, Europe and America.
Can Food Machinery,Can Food Machinery Can Food Processing Line,Can Food Machinery Canned Food Packaging Machine,Can Food Machinery Machine For Canning Food
Jump Machinery (Shanghai) Limited , https://www.fruitsmachinery.com