FC-300 radiator recycling machine is used for separating the outside aluminium foil and the inside copper pipe of wasted air conditioning radiator. Each set of this kind of machine just can separate two different specification radiators. Because the interval width of the copper pipe are different in the radiator, so we need you can offer us the width of the copper pipe of the radiator. In China, the width of the radiator copper pipe is 21MM, 25MM, and 19MM. Besides, the thickness is one layer and two layers.
car radiator recovery machine Features
1. Compact structure, taking up small area.
2. Humanized design, easy to operate.
3. High efficiency, separation within seconds.Â
4. Labor saving, use automatic recycling instead of labor working.Â
5. No damage to copper pipes, no copper loss, practical and economical.
6. Low investment, high profit.
Â
electric radiator recycling machine Specfications:Â
| Model | FC-300 |
| Productivity | 3000-4000Kg/day |
| Dimensions | 1800*850*1100mm (approximate) |
| Weight | 800kg (approximate) |
| Power Supply | 7KW |
| Voltage | customized |
car radiator recovery machine Structure
This separator machine is consisted of a frame, two motors, two speed reducers, material feeding part, material cutting part, material separation part, transmission part and material feeding panel.Â
If the raw material is more than two layers, operators can cut them by band saw for separating.Â
We also have larger capacity processing line of radiator recycling.Â
Capacity: more than 1200kg/h.Â
Please contact us freely to get more information. car radiator recovery machine Instruction&Application
FC-300 radiator recycling machine is used for separating the outside aluminium foil and the inside copper pipe of wasted air conditioning radiator. Each set of this kind of machine just can separate two different specification radiators. Because the interval width of the copper pipe are different in the radiator, so we need you can offer us the width of the copper pipe of the radiator. In China, the width of the radiator copper pipe is 21MM, 25MM, and 19MM. Besides, the thickness is one layer and two layers.
car radiator recovery machine Features
1. Compact structure, taking up small area.
2. Humanized design, easy to operate.
3. High efficiency, separation within seconds.Â
4. Labor saving, use automatic recycling instead of labor working.Â
5. No damage to copper pipes, no copper loss, practical and economical.
6. Low investment, high profit.
Â
electric radiator recycling machine Specfications:Â
| Model | FC-300 |
| Productivity | 3000-4000Kg/day |
| Dimensions | 1800*850*1100mm (approximate) |
| Weight | 800kg (approximate) |
| Power Supply | 7KW |
| Voltage | customized |
car radiator recovery machine Structure
This separator machine is consisted of a frame, two motors, two speed reducers, material feeding part, material cutting part, material separation part, transmission part and material feeding panel.Â
If the raw material is more than two layers, operators can cut them by band saw for separating.Â
We also have larger capacity processing line of radiator recycling.Â
Capacity: more than 1200kg/h.Â
Please contact us freely to get more information.
Flux Cored Wire:
Flux cored wire is also called powder-cored wire and tubular wire. It is divided into two categories: gas-entrained and non-gas-protected. The surface of the flux cored wire is the same as that of the Solid Wire and is made of materials such as low-carbon steel or low-alloy steel with good plasticity. The manufacturing method is to first roll the steel strip into a U-shaped section shape, then fill the U-shaped steel strip with solder powder prepared according to the dosage, roll it tightly with a rolling mill, and finally draw it into welding wires of different specifications.
Flux cored welding wire is a promising new welding material.
(1) Advantages:
1) For the welding of various steel materials, it is very convenient and easy to adjust the composition and proportion of the flux (the general-purpose flux-cored wire is often called the additive as the flux core, and the term flux only appears in the specific flux-cored wire). Requested weld chemistry can be supplied.
2) The process performance is good, and the welding seam is beautifully formed. Combined protection with gas slag is used to obtain good forming. The arc stabilizer is added to stabilize the arc and the droplet transfer is uniform.
3) Fast deposition speed and high production efficiency Under the same welding current, the flux-cored wire has high current density and fast melting speed. The deposition rate is about 85%-90%, and the productivity is about 3-5 times higher than that of electrode arc welding.
4) Larger welding current can be used for all-position welding.
(2) Disadvantages
1) The welding wire manufacturing process is complicated
2) When welding, wire feeding is more difficult than solid welding wire
3) The appearance of the welding wire is easy to rust, and the powder is easy to absorb moisture, so the requirements for the storage and management of the flux-cored welding wire are more stringent
|
Category |
AWS standard |
Chemical compostition of deposited metal(wt%) |
|||||||||||
|
C |
Mn |
Si |
Cr |
Ni |
Mo |
P |
S |
V |
Cu |
Fe |
|||
|
Carbon Steel and High Tensile Strength Steel Flux Cored Wire |
CO2 Gas Shield |
E71T-1C |
0.12 |
1.75 |
0.9 |
0.2 |
0.5 |
0.3 |
0.03 |
0.03 |
0.08 |
0.35 |
- |
|
Self-shielded |
E71T-11 |
0.04 |
1.3 |
0.22 |
0.02 |
0.01 |
0.01 |
- |
- |
- |
- |
- |
|
|
E71T-GS |
0.035 |
0.5 |
0.11 |
0.01 |
0.01 |
0.01 |
- |
- |
- |
- |
- |
||
|
Stainless Steel Flux Cored Wire |
CO2 Gas Shield |
E308LT1-1 |
0.04 |
0.5-2.5 |
1 |
18.0-21.0 |
9.0-11.0 |
0.75 |
0.04 |
0.03 |
- |
0.75 |
- |
|
E309LT1-1 |
0.04 |
0.5-2.5 |
1 |
22.0-25.0 |
12.0-14.0 |
0.75 |
0.04 |
0.03 |
- |
0.75 |
- |
||
|
E309LMoT1-1 |
0.04 |
0.5-2.5 |
1 |
21.0-25.0 |
12.0-16.0 |
2.0-3.0 |
0.04 |
0.03 |
- |
0.75 |
- |
||
|
E316LT1-1 |
0.04 |
0.5-2.5 |
1 |
17.0-20.0 |
11.0-14.0 |
2.0-3.0 |
0.04 |
0.03 |
- |
0.75 |
- |
||
|
Low-temperature Steel Flux CoredWire |
Heat-resistant Steel CO2 Gas Shield |
E81T1-K2C |
0.15 |
0.5-1.75 |
0.8 |
0.15 |
1.0-2.0 |
0.35 |
0.03 |
0.03 |
0.05 |
- |
- |
|
Low-temperature Steel |
E81T1-Ni1C |
0.12 |
1.5 |
0.8 |
0.15 |
0.8-1.1 |
0.35 |
0.03 |
0.03 |
0.05 |
- |
- |
|
|
E91T1-Ni2C |
0.12 |
1.5 |
0.8 |
- |
1.75-2.75 |
- |
0.03 |
0.03 |
- |
- |
- |
||
|
Weathering Steel CO2 Gas Shield |
E81T1-W2C |
0.12 |
0.5-1.3 |
0.35-0.8 |
0.45-0.7 |
0.4-0.8 |
- |
0.03 |
0.03 |
- |
0.3-0.75 |
- |
|
|
High-strength Steel CO2 Gas Shield |
E101T1-K3C |
0.15 |
0.75-2.25 |
0.8 |
0.15 |
1.25-2.60 |
0.25-0.65 |
0.03 |
0.03 |
0.05 |
- |
- |
|
|
Nickel-based Alloy Flux Cored Wire |
Mixed Gas Shield |
ENiCrMo3T0-4 |
0.1 |
0.5 |
0.5 |
20-23 |
≥58 |
8.0-10.0 |
0.02 |
0.15 |
- |
- |
5 |
|
ENiCrMo4T0-4 |
0.02 |
1 |
0.5 |
14.5-16.5 |
Rem |
15.0-17.0 |
0.03 |
0.03 |
- |
- |
4.0-7.0 |
||
|
ENiCrMo10T0-4 |
0.02 |
1 |
0.5 |
20.0-22.5 |
Rem |
12.5-14.5 |
0.03 |
0.015 |
0.35 |
0.5 |
2.0-6.0 |
||
Flux cored wire is a very widely used welding process. It is widely used in the welding of low carbon steel, low alloy steel and other alloy materials in heavy manufacturing, construction, shipbuilding, offshore facilities and other industries.
If you have any questions, please contact with us directly. Welcome you can visit our Factory.For inquiry, please send mail directly to us.
Flux Cored Wire,Flux Core Welding,Flux Core Welding Wire,Stainless Steel Flux Core Wire
JIANGSU FUERMU WELDING CORPORATION , https://www.fuermuwelding.com