Stirring tank instructions

I. Overview

I plant the production of a single impeller leaching tank, the Department of Beijing Nonferrous Metallurgy Design Research Institute successfully developed the design, this series of stirred tank leaching with a reasonable structure, large mixing strength, less maintenance, etc., advanced technology, reasonable price, It is in a leading position in similar products in China and can be widely used in gold leaching, storage and other metallurgical, chemical industry mixing and mixing operations.

Second, the characteristics and use of single impeller leaching agitation tank

(1) The power consumption is small, the axial speed is large, the radial speed is small, the stirring intensity is large, and the mixing effect is good.

(2) The impeller is lightly loaded above the “slurry sedimentation zone”, so the starting power is small, which greatly reduces the labor intensity of the operator.

(3) The effective volume is large and the floor space is small.

(4) The impeller has novel materials and long service life.

Simple (V) structure, and easy maintenance, by small and medium beneficiation plant Welcome, this agitation tank for high viscosity settlement rate than the major ore -200 mesh fineness below 85%, the slurry concentration is less than 45% (by wt. Gold leaching adsorption and other mixing and mixing operations.

Third, the working principle of single impeller leaching agitation tank

The single impeller is clockwise (viewed from top to bottom). The blade immersed in the slurry rotates and pushes the slurry. The slurry flows from the upper part of the circulation cylinder to the blade and flows downward through the guide vane. When the slurry passes through the circulation After the cylinder, it will move into the lateral direction, then flow upward along the outer wall of the circulation cylinder, and then return to the upper part of the circulation cylinder to form a closed loop. As the new slurry continues to be fed into the tank, the qualified pulp which is thoroughly mixed by the agent and the air will continue to be continuously The discharge port (overflow port) is discharged, and the leaching operation of the tank is completed.

Fourth, the working principle diagram of single impeller leaching agitation tank (see Figure 1)

Figure 1 Working principle diagram of single impeller leaching agitation tank

5. Technical data of single impeller leaching agitation tank (see Table 1)

Table 1 Single Impeller Leaching Stirring Tank Technical Data Sheet

Six, ordering instructions

(1) The single impeller series leaching agitation tank produced by our factory has the form of flat bottom groove, among which Φ1500×1500, Φ2000×2000 and cone bottom groove form, the user needs to supply the supply requirements when needed.

(2) Regarding the position of the ore supply, the discharge port and the discharge port on the cylinder, it can be supplied according to the requirements put forward by the user, otherwise it will be manufactured according to the original design.

(3) The release pipe and valve shall be provided by the user.

(4) If the user has other special requirements, please come to negotiate with us, the factory can be manufactured according to special requirements.

Welding Line Constant Force Actuator

Our Welding Line Force Control System, Welding Line Constant Force Actuator, Welding Line active contact flange have many advantages over other grinders. It can realize flexible grinding, quick repsond to surface changing, and instant adjusting. Traditional mechanic hand lacks flexibility, and it is not easy to adjust, hard to realize mass production.

Welding Line Constant Force Actuator,Welding Line active contact flange,Welding Line force control system

DARU Technology (Suzhou) Co., Ltd. , https://www.yiwufizz.com