Airport Security Equipment Hand-Held Metal Detector (MD-3003)

MD-3003B1 hand held metal detector 
 
Quick Detail:
1. highly sensitive 
2. 2.LED alarm
 
Specifications:
 
 
Description:
It can easily detect pin-size metal articles (away 3.5cm to the probe)
It has an independent battery low voltage system and the yellow light will be on
With sound & light and vibration alarm.
With shielded damp-proof sensitivity adjusting hole
Working power supply: 6F22ND 9V battery (alkaline rechargeable battery), rechargable battery should be taken out and rechared (the price included the charger and battery) 
Alarm modes:Simultaneous sound (vibration)and light alarm.
 
Main Advantages: 
1.Pin : 30-60mm
2.64 model handgun: 150mm
3.6 inch long knife: 160mm
4.Diameter 20mm.Steel Ball: 90mm
 
Application places:
1. Electronic detection inspection at airports, railway stations and wharfs.
2.Security inspection of customs, public securities.
3.Quality inspection of medicine and food commercial systems.
4.Security inspection of important sites and playgrounds.
5.Noble metal detection, such as gold or silver jewelry manufacturing plants.
MD-3003B1 hand held metal detector 
 
Quick Detail:
1. highly sensitive 
2. 2.LED alarm
 
Specifications:
 
 
Description:
It can easily detect pin-size metal articles (away 3.5cm to the probe)
It has an independent battery low voltage system and the yellow light will be on
With sound & light and vibration alarm.
With shielded damp-proof sensitivity adjusting hole
Working power supply: 6F22ND 9V battery (alkaline rechargeable battery), rechargable battery should be taken out and rechared (the price included the charger and battery) 
Alarm modes:Simultaneous sound (vibration)and light alarm.
 
Main Advantages: 
1.Pin : 30-60mm
2.64 model handgun: 150mm
3.6 inch long knife: 160mm
4.Diameter 20mm.Steel Ball: 90mm
 
Application places:
1. Electronic detection inspection at airports, railway stations and wharfs.
2.Security inspection of customs, public securities.
3.Quality inspection of medicine and food commercial systems.
4.Security inspection of important sites and playgrounds.
5.Noble metal detection, such as gold or silver jewelry manufacturing plants.

Nox Sensor 12V For CHRYSLER Car

Nox Sensor 12V for Chrysler car, auto parts Chrysler car sensor 12V Nox sensor is suitable for Chrysler car exhaust treatment.

Nox sensor is one of the key components of SCR post-treatment system. It is used to measure the concentration of nitrogen and oxygen in engine exhaust to meet the needs of closed-loop control of engine aftertreatment system and on-board OBD diagnostic system. It can be applied to gas engine or diesel engine. Its structure includes ceramic probe, cable and processing chip controller, which is connected with ECU through can communication.

The effects of Nox sensor damage are as follows:

1. If the Nox sensor is damaged, the diesel control system is in an open-loop state, that is, the emission data cannot be accurately fed back, and the engine control unit cannot accurately adjust the emission. At this time, the vehicle's emission must exceed the standard. If it always exceeds the standard, the service life of tail gas emission treatment equipment will be shortened.

2. Because it is a key component for measuring the excessive exhaust of diesel vehicles. If it is damaged or works poorly, it will directly cause multiple fault lights of the engine to turn on. At the same time, there will be relevant fault storage records in the control unit.

3. The damage of Nox sensor will lead to the disorder of diesel combustion control, resulting in weak acceleration, idle jitter, unable to start and so on,.

Once a problem occurs, the Nox sensor needs to be replaced in time. It is usually installed at the rear end of the catalyst in the exhaust pipe.

Nox Sensor 12V For CHRYSLER Car,Dodge Auto Parts 12V Nox Sensor,Chrysler car sensor 12V Nox sensor,For Chrysler Dodge 12V Nox sensor

Ruian OKOOO Electronic Technology Co., LTD , https://www.okoosensor.com