Suitable for insulation extrusion for core-wire (conductor single-layer or single-lyer + Stripping) of UL electronic wire, LAN cable, data communication cable and power wire etc.
2. Technical Parameters:
| Model | Â Â XJ-30 | Â XJ-40 | Â XJ-50 | Â XJ-60 |
| Inlet wire | Φ0.2-1.5mm | Φ0.3-2.5mm | Φ0.4-4.0mm | Φ1.2-6.0mm |
| Finished wire | Φ0.3-2.0mm | Φ0.4-3.0mm | Φ0.6-5.0mm | Φ1.5-8mm |
| Extrusion material | Â PVC, SR-PVC, PP, PU, PE, HDPE | |||
| Screw Parameters | L/D:26:1, compression ratio: 2.7-3.2, material: 38CrMoAIA Vacuum heating treatment, surface grinding, chromium plating and polishing. | |||
| Segments of temperature control | Â 3+2 | Â 4+2 | 4+2 | Â 5+2 |
| Main power | 7.5HP | 10HP | 15HP | 20HP Â |
| Max. output | Â 35KG/H | Â 45KG/H | Â 60KG/H | Â 80KG/H |
| Line speed |  400M/min | 500M/min | 600M/min | 800M/min |
| Movable water tank | Â Extension type movable water tank, Â movable distance:Max.500mm,overall length:1.8M, Â With single segment type air wiper. | |||
| Fixed water tank | Â U type, 9M | U type, 9M | U type, 9M | U type, 9M |
| Capstan power | Â 3HP | Â 3HP | 3HP | 5HP |
| Pay-off type | Automatic shaft or shaftless active type pay-off, applicable bobbin:Φ100-300, Slider swiming rod and hammer tension type structure, online tension display combined with ruler with wire break protection. | |||
| Take-up type | Double shaft type take-up with traverser, 3HP motor with inverter to adjust speed, Can be operated by single action and linkage, automatically stops when the set length is reached; applicable bobbin: Φ400-500mm. | |||
| Â Â ITEM | Â Â Â Â DESCRIPTIONÂ | Â Â Â Â QTYÂ Â Â Â (pcs/set) |
     REMARKS |
| 01 | Active type pay-off machine | 1 | Â |
| 02 | High-frequency preheater | 1 | Â |
| 03 | Straightening device | 1 | Â |
| 04 | Main extruder | 1 | Â |
| 05 | Automatric drying hopper and suction machine | 1 | Optional: Manual type |
| 06 | Numerical control electric cabinet | 1 | Â |
| 07 | Movable water tank | 1 | Â |
| 08 | Single layer cooling water tank | 1 | Â |
| 09 | Horizontal wire accumulator | 1 | Â |
| 10 | Double wheel belt capstan | 1 |  |
| 11 | Double shaft take-up machine | 1 | Â |
| 12 | Meter counter | 1 | Â |
| 13 | Laser diameter tester | 1 | Â |
| 14 | High-frequency spark tester | 1 | Â |
| 15 | LED Electronic displayboard | 1 | Â |
1) Used widely:Â Suitable for insulation extrusion for core-wire (conductor single-layer or single-lyer + Stripping) of UL electronic wire, LAN cable, data communication cable and power wire etc.
2) High output: Optimize the design of screw, screw durable, chromeplate non worn down, non conglutination, color-change quickly, high speed, high output.
3) High quality: Extrusion concentricity:over 93%, OD tolerance: +/- 0.005mm;
4) Temperature control stability: Adopted SCR power controller with imported high quality temperature control table and copper casting heater, temperature tolerance: +/- 1ºC;
5) Easy operation: Exclusive adopted NEWTOPP Teflon specialized touch screen, both provide Chinese/English operation interface, automatic control, easy to operate.
6) Save place: Combined the traditional accumulating, capstan, take-up and meter counter and so on auxiliary devices into integration structure, compact layout, overall length will be reduced more than 5Â meters.
5. Machine pictures:
6. Abuot us:
7. Certificates of Patent and Honor:
8. Shipment scenes:
9. FAQ
1) Are you a manufacturer or trading company?
We are a manufacturer with more than 10 years of R&D and manufacturing experience in the field of cable machinery ; our machines are exported to different countries, such as Italy, Russia, Iran, Japan, India, Korea,Thailand, Malaysia, Vietnam etc, and have received recognition and praise from customers.
2) How can we get to your factory to see the machines?
Add: No.286 Huai'de road, Humen Town, Dongguan City,Guangdong Province,China.Â
Only 40 minutes by car from Shenzhen Baoan International airport to our factory;
Only 2.5 hours by car from Guangzhou Baiyun Airport to our factory;Â
Only 17 minutes by high-speed rail from Guangzhou south station to Humen.
        Â
Suitable for insulation extrusion for core-wire (conductor single-layer or single-lyer + Stripping) of UL electronic wire, LAN cable, data communication cable and power wire etc.
2. Technical Parameters:
| Model | Â Â XJ-30 | Â XJ-40 | Â XJ-50 | Â XJ-60 |
| Inlet wire | Φ0.2-1.5mm | Φ0.3-2.5mm | Φ0.4-4.0mm | Φ1.2-6.0mm |
| Finished wire | Φ0.3-2.0mm | Φ0.4-3.0mm | Φ0.6-5.0mm | Φ1.5-8mm |
| Extrusion material | Â PVC, SR-PVC, PP, PU, PE, HDPE | |||
| Screw Parameters | L/D:26:1, compression ratio: 2.7-3.2, material: 38CrMoAIA Vacuum heating treatment, surface grinding, chromium plating and polishing. | |||
| Segments of temperature control | Â 3+2 | Â 4+2 | 4+2 | Â 5+2 |
| Main power | 7.5HP | 10HP | 15HP | 20HP Â |
| Max. output | Â 35KG/H | Â 45KG/H | Â 60KG/H | Â 80KG/H |
| Line speed |  400M/min | 500M/min | 600M/min | 800M/min |
| Movable water tank | Â Extension type movable water tank, Â movable distance:Max.500mm,overall length:1.8M, Â With single segment type air wiper. | |||
| Fixed water tank | Â U type, 9M | U type, 9M | U type, 9M | U type, 9M |
| Capstan power | Â 3HP | Â 3HP | 3HP | 5HP |
| Pay-off type | Automatic shaft or shaftless active type pay-off, applicable bobbin:Φ100-300, Slider swiming rod and hammer tension type structure, online tension display combined with ruler with wire break protection. | |||
| Take-up type | Double shaft type take-up with traverser, 3HP motor with inverter to adjust speed, Can be operated by single action and linkage, automatically stops when the set length is reached; applicable bobbin: Φ400-500mm. | |||
| Â Â ITEM | Â Â Â Â DESCRIPTIONÂ | Â Â Â Â QTYÂ Â Â Â (pcs/set) |
     REMARKS |
| 01 | Active type pay-off machine | 1 | Â |
| 02 | High-frequency preheater | 1 | Â |
| 03 | Straightening device | 1 | Â |
| 04 | Main extruder | 1 | Â |
| 05 | Automatric drying hopper and suction machine | 1 | Optional: Manual type |
| 06 | Numerical control electric cabinet | 1 | Â |
| 07 | Movable water tank | 1 | Â |
| 08 | Single layer cooling water tank | 1 | Â |
| 09 | Horizontal wire accumulator | 1 | Â |
| 10 | Double wheel belt capstan | 1 |  |
| 11 | Double shaft take-up machine | 1 | Â |
| 12 | Meter counter | 1 | Â |
| 13 | Laser diameter tester | 1 | Â |
| 14 | High-frequency spark tester | 1 | Â |
| 15 | LED Electronic displayboard | 1 | Â |
1) Used widely:Â Suitable for insulation extrusion for core-wire (conductor single-layer or single-lyer + Stripping) of UL electronic wire, LAN cable, data communication cable and power wire etc.
2) High output: Optimize the design of screw, screw durable, chromeplate non worn down, non conglutination, color-change quickly, high speed, high output.
3) High quality: Extrusion concentricity:over 93%, OD tolerance: +/- 0.005mm;
4) Temperature control stability: Adopted SCR power controller with imported high quality temperature control table and copper casting heater, temperature tolerance: +/- 1ºC;
5) Easy operation: Exclusive adopted NEWTOPP Teflon specialized touch screen, both provide Chinese/English operation interface, automatic control, easy to operate.
6) Save place: Combined the traditional accumulating, capstan, take-up and meter counter and so on auxiliary devices into integration structure, compact layout, overall length will be reduced more than 5Â meters.
5. Machine pictures:
6. Abuot us:
7. Certificates of Patent and Honor:
8. Shipment scenes:
9. FAQ
1) Are you a manufacturer or trading company?
We are a manufacturer with more than 10 years of R&D and manufacturing experience in the field of cable machinery ; our machines are exported to different countries, such as Italy, Russia, Iran, Japan, India, Korea,Thailand, Malaysia, Vietnam etc, and have received recognition and praise from customers.
2) How can we get to your factory to see the machines?
Add: No.286 Huai'de road, Humen Town, Dongguan City,Guangdong Province,China.Â
Only 40 minutes by car from Shenzhen Baoan International airport to our factory;
Only 2.5 hours by car from Guangzhou Baiyun Airport to our factory;Â
Only 17 minutes by high-speed rail from Guangzhou south station to Humen.
        Â
Intergrated Design Batch Waste Plastic Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.
Flowchat of Batch Waste Tyre Pyrolysis Plant
Advantages of Batch Waste Tyre Pyrolysis Plant
1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.
2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.
3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.
4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.
5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.
6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.
8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.
Technical Parameter of Batch Waste Tyre Pyrolysis Plant
|
NO. |
ITEM |
PROJECT |
|
|
1 |
Equipment Model |
XY-7 |
XY-8 |
|
2 |
Door Model |
Full Open Door |
Full Open Door |
|
3 |
Suitable Raw Materials |
Rubber/Plastic Products |
Rubber/Plastic Products |
|
4 |
Structure |
Horizontal Type Revolves |
Horizontal Type Revolves |
|
5 |
Reactor Size |
Φ2200*6000mm Φ2600*6600mm |
Φ2200*6000mm Φ2600*6600mm |
|
6 |
Capacity for One Batch |
5-6Mt; 8-10Mt |
5-6Mt; 8-10Mt |
|
7 |
Oil Yield of Tires |
40%-45% |
40%-45% |
|
8 |
Work Pressure |
Normal Pressure |
Normal Pressure |
|
9 |
Reactor Rotation Speed |
0.4R/M |
0.4R/M |
|
10 |
Fuels Choice |
Coal, Wood |
Coal, Wood, Gas, Oil |
|
11 |
Power |
18KW/H |
18-25KW/H |
|
12 |
Cooling Method |
Water Cycling |
Water Cycling |
|
13 |
Type of Drive |
External Annular Gear |
External Annular Gear |
|
14 |
Heating Method |
Direct |
Direct |
|
15 |
Type of Installation |
With Foundation |
With Foundation/Integrated Base |
|
16 |
Noise dB(A) |
≦85 |
≦85 |
|
17 |
Operation Mode |
Intermittent Operation |
Intermittent Operation |
|
18 |
Total Weight(MT) |
25-40 |
25-40 |
|
19 |
Installation Space Required |
30m*10m |
30m*10m |
|
20 |
Manpower |
3~4/batch |
3~4/batch |
|
21 |
Shipment |
Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR |
Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR |
Integrated Design Batch Waste Plastic Pyrolysis Plant
Intergrated Design Batch Waste Plastic Pyrolysis Plant,Waste Plastic Pyrolysis Plant,Rubber Pyrolysis Recycling Plant
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com