Heavy-Duty Material Rack Installation, Automated Production and Processing, Feeding Equipment

At present, the yield point stress of cold-rolled sheets, pickling boards, aluminum sheets, galvanized sheets, etc., which are commonly used in stamping, shearing, laser cutting, and roll forming, is not high, and it is possible to use a heavy-duty material rack to install an optional device. Good unwinding effect.

If the weight of the material roll is heavy, the oil pressure expansion is added; if the material thickness is large (more than 2 mm), the pneumatic pressure arm is added; when the material roll is wide, the upper arm device is added, and the heavy material frame is also Has been widely favored by customers.

However, with the continuous expansion of the scope of application in the field of automation, many high-strength and high-tension thick-plate materials are currently used in automated production lines for processing. At this time, the material-carrying equipment also uses the commonly used heavy-duty material rack type.

There will be obvious problems. The yield strength of such a plate material roll is extremely high. After the roll of the material roll is unwound, the press of the upper press arm is not enough to solve the problem of the material roll, and the lower part of the roll is still Will spread quickly.

Not only will the board and the machine foot and the ground produce multiple frictions, causing the surface of the board to be scratched, affecting the overall unwinding process, and it is easy to cause a safety accident and cause injury.

Such high-strength plates and high-tension thick plates require the use of Ruihui Machinery's high-tension thick plate heavy-duty material frame. The high-tension thick plate heavy-duty material frame is a special customized type, which is a special organic type developed by Ruihui Machinery for the plate material coil with high yield strength and high tensile strength.

The utility model is provided with two feeding devices arranged circumferentially around the axis of the expansion and contraction device at the bottom of the heavy material frame. When the material is wound in the unwinding process, the feeding device can be matched with the upper pressing device to always hold the pressure device tightly. The material roll fundamentally avoids the occurrence of material bulk material.



The high-tension thick plate heavy-duty material support device consists of a support bracket (mounted by a bearing) connected to the base of the material frame, a pneumatic material drive device supporting the support of the support bracket, and a support roller mounted on the support bracket. .

The supporting bracket provides a stable driving force by the pneumatic feeding device, so that the supporting bracket provides a stable and reliable supporting force along the radial movement of the expansion and contraction reel, and ensures the discharging of the high tension plate material roll, The unwinding process is always stable and reliable.




Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
"QUALITY IS OUR CULTURE" Our quality is not the best in the world, and the price is not the cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the machine can be used more than 10 years.
Q6: Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or distributors all over the world.
Q7:What's your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What's the delivery?
"TIME IS GOLD" for you and for us, so we have professional team work and production line can make nice quality in short time.

1.  Pre-Sales Service:We have professional designers to meet the different requirement of our customers.

2.  After-Sales service:We have an efficient team to meet 24*7 all day service.

3.  Full-Service:Actively cooperate with customers to deal with problems in equipment using.

4.  Engineers can provide service machinery overseas.

At present, the yield point stress of cold-rolled sheets, pickling boards, aluminum sheets, galvanized sheets, etc., which are commonly used in stamping, shearing, laser cutting, and roll forming, is not high, and it is possible to use a heavy-duty material rack to install an optional device. Good unwinding effect.

If the weight of the material roll is heavy, the oil pressure expansion is added; if the material thickness is large (more than 2 mm), the pneumatic pressure arm is added; when the material roll is wide, the upper arm device is added, and the heavy material frame is also Has been widely favored by customers.

However, with the continuous expansion of the scope of application in the field of automation, many high-strength and high-tension thick-plate materials are currently used in automated production lines for processing. At this time, the material-carrying equipment also uses the commonly used heavy-duty material rack type.

There will be obvious problems. The yield strength of such a plate material roll is extremely high. After the roll of the material roll is unwound, the press of the upper press arm is not enough to solve the problem of the material roll, and the lower part of the roll is still Will spread quickly.

Not only will the board and the machine foot and the ground produce multiple frictions, causing the surface of the board to be scratched, affecting the overall unwinding process, and it is easy to cause a safety accident and cause injury.

Such high-strength plates and high-tension thick plates require the use of Ruihui Machinery's high-tension thick plate heavy-duty material frame. The high-tension thick plate heavy-duty material frame is a special customized type, which is a special organic type developed by Ruihui Machinery for the plate material coil with high yield strength and high tensile strength.

The utility model is provided with two feeding devices arranged circumferentially around the axis of the expansion and contraction device at the bottom of the heavy material frame. When the material is wound in the unwinding process, the feeding device can be matched with the upper pressing device to always hold the pressure device tightly. The material roll fundamentally avoids the occurrence of material bulk material.



The high-tension thick plate heavy-duty material support device consists of a support bracket (mounted by a bearing) connected to the base of the material frame, a pneumatic material drive device supporting the support of the support bracket, and a support roller mounted on the support bracket. .

The supporting bracket provides a stable driving force by the pneumatic feeding device, so that the supporting bracket provides a stable and reliable supporting force along the radial movement of the expansion and contraction reel, and ensures the discharging of the high tension plate material roll, The unwinding process is always stable and reliable.




Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
"QUALITY IS OUR CULTURE" Our quality is not the best in the world, and the price is not the cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the machine can be used more than 10 years.
Q6: Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or distributors all over the world.
Q7:What's your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What's the delivery?
"TIME IS GOLD" for you and for us, so we have professional team work and production line can make nice quality in short time.

1.  Pre-Sales Service:We have professional designers to meet the different requirement of our customers.

2.  After-Sales service:We have an efficient team to meet 24*7 all day service.

3.  Full-Service:Actively cooperate with customers to deal with problems in equipment using.

4.  Engineers can provide service machinery overseas.

Four-column Hydraulic Press

Hydraulic Shop Press,Hydraulic Power Press,Hydraulic Bearing Press,Four-Column Hydraulic Press

Wuxi DALI Hydraulic Machinery Factory , https://www.hydraumatic.com