| Type | P6017 |
| Rated Voltage | 12V / 24V / 48V |
| Voltage Range | 8-20V / 12-30V / 36-55V |
| Max Flow | 17L/min, 20L/min, 21L/min |
| Max Lift | 8m / 11m / 12m |
| Max Noise | 40dB / 45dB / 48dB |
| Motor Type | DC Brushless Motor |
| Food Grade(Y/N) | Y |
| Liquid Temperature | 0-100ºC |
| Ambient Temperature | -25-70ºC |
| Pump Theory | Centrifugal Pump |
| Medium | Hot or cold water, beverage, oil, antifreeze |
| Protection Level | IP68 |
| Using Place | Indoor / Outdoor |
| Power Consumption | 36W / 53W / 62W |
| Service Life | 20000 hours |
| OD of inlet | 1/2 inch |
| OD of Outlet | 1/2 inch |
| Dimension | 108*86*60mm |
| Power supply | Battery / Electric / Solar panel |
| Structure | Single-stage |
| Material | PPS |
| Customized functions |
1, Dry-running protection 2, Submersible 3, PWM speed adjustable 4, FG signal output 5, Locked-rotor protection |
| Remarks | Not self-priming |
BLDC 12V submersible hot and cold water circulation pump| Type | P6017 |
| Rated Voltage | 12V / 24V / 48V |
| Voltage Range | 8-20V / 12-30V / 36-55V |
| Max Flow | 17L/min, 20L/min, 21L/min |
| Max Lift | 8m / 11m / 12m |
| Max Noise | 40dB / 45dB / 48dB |
| Motor Type | DC Brushless Motor |
| Food Grade(Y/N) | Y |
| Liquid Temperature | 0-100ºC |
| Ambient Temperature | -25-70ºC |
| Pump Theory | Centrifugal Pump |
| Medium | Hot or cold water, beverage, oil, antifreeze |
| Protection Level | IP68 |
| Using Place | Indoor / Outdoor |
| Power Consumption | 36W / 53W / 62W |
| Service Life | 20000 hours |
| OD of inlet | 1/2 inch |
| OD of Outlet | 1/2 inch |
| Dimension | 108*86*60mm |
| Power supply | Battery / Electric / Solar panel |
| Structure | Single-stage |
| Material | PPS |
| Customized functions |
1, Dry-running protection 2, Submersible 3, PWM speed adjustable 4, FG signal output 5, Locked-rotor protection |
| Remarks | Not self-priming |
Technical performance
ITEM
PRIDUCT NUMBER
WOUND ROLL
MAXIMUM STATIC TENSION OF WIRE ROPE
MAXIMUM STATIC TENSION OF WIRE ROPE
MAXIMUM DIAMETER OF WIRE ROPE
THE MINIMUN WIRE BREAKING TENSION
HOISTING HEIGHT
THE MAXIMUM HOIST SPEED
THE SPEED RATIO OF REDUCER PREFERRED
ROTATING PART OF THE DISPLACEMENT
REFER TO THE WEIGHT
SIZE
MOTOR SPEED
PCS
DIAMETER
WIDTH
CERTER DISTANCE
MANNED
LOAD
MANNED
LOAD
A LAYER OF WINDING
SECOND LAYER OF WINDING
THERR LAYERS OF WINDING
M
M
KN
mm
KN
M
M\S
KG
KG
M
R\MIN
1
JK-2 x 1.5
1
2.0
1.50
/
44
61
44
61
24
396.5
295
586
914
5.2
20.0
6600
24100
10.5x8.7 x2.9
1000
31.5
7242
2
JK-2.5 x 2
2.5
2.00
69
83
69
83
30
621
403
802
1245
5.0
20.0
13679
39460
12.8x9.7 x2.9
750
31.5
13317
3
JK-3 x 2.2
3.0
2.20
100
135
100
135
36
900
447
887
1378
6.0
20.0
31.5
19000
58340
13.5x10.5 x2.9
4
2JK-2 x 1
2
2.0
1.00
1.09
44
61
40
24
396.5
177
346
550
7.0
11.2
20.0
9740
29300
12.7x9.5 x2.9
750
31.5
10021
5
2JK-2.5 x 1.2
2.5
1.20
1.29
69
83
65
30
621
215
422
670
8.8
11.2
13707
40470
13.8x9.5 x2.9
20.0
13695
31.5
13675
6
2JK-3 x 1.5
3.0
1.50
1.59
100
135
90
36
900
282
553
873
10.5
11.2
21690
56924
14.4x10 x2.9
20.0
22588
31.5
22336
7
2JK-3.5 x 1.7
3.5
1.70
1.79
136
170
115
115
42
1230
324
635
/
12.3
11.2
26171
75456
15.1x10.4 x2.9
20.0
26526
8
2JK-4 x 2.1
4.0
2.10
2.19
216
245
160
160
50
1962
405
790
/
12.6
11.2
42400
106000
18.8x10.8 x2.9
600
20.0
42400
9
2JK-5 x 2.3
5.0
2.30
2.39
280
180
180
62
2520
458
895 •
/
12
11 2 20.0
49272
146625
16.7x12.4 x2.9
500
The host, head sheave mounted,, different types of console, depth indicator, hydraulic station # slip station; electric drive and control system, information transmission system;the user demand, it can produce different specifications of products, to meet thedemand for bank.
Scope of supply:
Summary:
This series of products used in coal, metal ores and non Gimli mine hoist, mineral, lifting and lowering material, equipment and so on, can also be used as other traction transport.
Working principle.
The drum motor drive to the winding wire rope of the reducer, the container lifting and lowering; through the electrical transmission to realize deceleration; Disc Brake braking by hydraulic and electric control; depth indicator through the position indication system implementation of the container; system to realize the monitoring and protection of the joint control of the machine, electricity, liquid through a variety of sensor and control components; the information transmission through the implementation of lifting machine, computer and network technology.
Technical paramaters:
1, the integral type, two valve, four petal several types of drum;
2, drum rope groove by spiral rope slot engineering plastic lining pressed, rope transition device is arranged between layers;
3, using the cylinder rear disc brake, electric and hydraulic control; hydraulic station is divided into two types of medium and high-pressure. Medium pressure hydraulic station constant system
Dynamic electrical delay and hydraulic delay two class brake two; in the high-pressure hydraulic station constant speed and constant braking moment two class brake two types. Liquid
Pressure station can be equipped with a pressure sensor, a pressure relay;
4, the spindle and the reel with large torque friction connection plane;
5, by the photoelectric encoder, signal monitoring. The whole angle machine and low speed DC tachogenerator device, speeding, winding, depth indicator failure
Monitoring and protection function of brake wear, fatigue and improve;
6, the console integrated and separated two kinds of types, all of the electrical instrument integrated with signal lamp, reliable performance and new type of integral operators
Handle, and digital depth indicator and digital and screw type depth indicator as one of the depth indicator system. Have industrial TV or calculation
Machines, printers and other special table;
7, pulley device adopts an integral or the two petal type cast welding structure, using the rolling bearing and the rim is provided with a friction lining PVC or nylon;
8, can be equipped with lifting machine network control and remote diagnosis system of mine;
Workshop show
Factory equipment
Luoyang Hong Xin Heavy Co., LTD. is located in Luoyang Xin'an Industrial Park, Luoyang Hongxin Heavy Machinery Co., Ltd is an enterprise featured with industrial designing, processing and manufacturing, which is qualified for import-export trade. Covering an area of 15,000 square meters and holding an annual production value of 80 million RMB, the company of 20 million RMB registered capital has total 100 staff members, among which there are 20 engineering technicians owning senior and medium professional titles and 40 intermediate and senior technicians capable of product designing and developing.
Hongxin is dedicated to produce reducers, hoists, crushers, Ball Grinding Mills and the equipments of screening, coal washing, metallurgy and cement, and replacement parts. Meanwhile, we provide the perform maintenance service for various series of equipments. There are 52 large-scale equipments applied into the manufacturing process, such as T200 CNC floor boring and milling machine, YK 73125 CNC molding gear grinding machine, YK322B CNC molding gear grinding machine, Y3200 gear hobbing machine, Y1600 CNC gear sharper, 4m vertical lathe, 6.3m CNC vertical lathe, T110 CNC boring machine, and 52 middle-sized productive and assistive equipments, which integrate strong manufacturing and processing capability with complete managing system of production and technology, quality management system and comprehensive testing measures
certificates
contacts
Single-rope Mine Drum Hoist
Single-rope Mine Drum Hoist,Mine Electric Drum Hoist,Mine Electric Drum Hoist,Mine Drum Hoist
Luoyang Hongxin Heavy Machinery CO., TLD. , https://www.komaessolar.com