Whether it is a large car or a dashboard on a small or medium-sized car, there are different warnings. The way to turn off and blink is to warn and advise the owner of the car. The performance is normal. There may be some car owners who just can understand the basic common sense warning signs such as the water temperature gauge and the oil amount. The indicator lights on the other parts of the instrument panel will become a little helpless and even appear to be independent of the components. It is such a misunderstanding that it is normal to think that it is normal when there is a failure. Therefore, not only the basic light language interpretation, but also other parts of the light language warning should all be clear about the problem, in order to be able to use the vehicle more handy, so Xiao Bian to light the dashboard warning light , for everyone to simply and simply narrate the mystery.
1. Medium-sized car water temperature indicator At normal temperatures, the pointer will not stop in the red zone or at a position higher than 95 degrees Celsius, but it may be that some models will be higher. The indicator light of the water temperature meter can clearly tell the driver if the engine of the vehicle is under normal operating temperature and there is no abnormal high temperature condition. Now that the temperature of the weather is simply too hot, it is very easy for a medium-sized car to have an excessively high engine temperature. Therefore, when driving a vehicle, you must pay close attention to the indicators of the water temperature meter. If the indicator of the water temperature indicator indicates a red area or a position higher than 90-95 degrees Celsius, then the vehicle should be parked in a safe position and checked. If the engine of a medium-sized car is already in a situation where the pan is boiling, do not touch it for the time being. Wait patiently for the temperature to drop. You can add cooling water to it or check the vehicle to the nearest service station. This will cause the water temperature to be too high. Find out and do maintenance work.
2. If the medium-sized car is lit during the driving process, the ABS may have malfunctioned. Because when the vehicle is in normal driving, it proves that the brake is normal, and there is no need to worry too much here. Nor does it mean that the ABS fault light represents a problem after the brakes turn on. The relationship between the two is not in series. The ABS system will only start when the vehicle tires are about to lock up, when the tires are not locked. When it does not start, so that as long as the vehicle's brake system is not a failure, the brake can still be used normally, as long as the vehicle is able to drive, you can first rest assured that the maintenance station to solve it.
3. If the medium-sized car's engine pressure gauge indicates too high or the warning light is directly on, turn off the safety shutdown and check first. The first check is whether the oil is defective. After the vehicle is turned off, pull out the oil dipstick of the engine and observe whether the liquid level of the oil inside is between the highest position and the lowest position. If the oil level is normal, if your own technology is limited, then call a professional maintenance staff to do a professional inspection.
4, the medium-sized car is in the normal driving process, the brake release after the brake alarm indicator light up, it is necessary to check the brake oil after parking, and see whether the liquid level in the standard position. If it is the brake fluid defect of the medium-sized car, it must be carefully checked to see if there is a leak. Under normal circumstances, the brake fluid will not be lost too much. Once the loss of the brake fluid of a medium-sized car will cause the brake of the vehicle to malfunction, so this point must be paid great attention. If there is no shortage of brake fluid, it is necessary to drive the vehicle to a professional service station to check whether the brake light switch and the sensor on the brake fluid level have malfunctioned.
Large moulds are made into injection moulds and metal moulds, which can produce die-casting or injection molded products according to customer needs, such as auto parts molds, etc., which can produce structural strength and stiffness, surface hardness and surface roughness in automobile, motor industry, aeronautics and Astronautics, transportation and so on. The processing precision of D has higher requirements for large parts. The company has many years of experience in manufacturing large molds, efficient, safe and environmentally friendly, and can use raw materials according to customer requirements.
NOTE: All products are photographed in factories
just use as technology sample
Large Mould Manufacturing,Injection Mold Abs Plastic Mold,Large Injection Mould,Auto Parts Mold
Ruizhun Precision Metal Co., Ltd. , https://www.rzjmdiecasting.com