There is always a car behind the front of the road with a large can, but most people just know the name, it is a tanker, but the specific thing for the tanker is not a special understanding, but clearly On the highway, the tanker needs to maintain a certain distance. There should be no basic knowledge of open flame near the tanker. Today we mainly discuss the precautions of the tanker (conventional and unconventional Note) There are also installation methods (mainly provided to the owner).
First of all, there is knowledge about cleaning. In fact, car owners all know that cars and other things need regular cleaning of river maintenance, not to mention the heavy-duty vehicles such as tankers. What are the main parts of general cleaning? The parts that are in contact with oil and gas, such as oil pumps, oil pipelines, filter screens for oil and gas, ball valves, and tanks, need special personnel for regular cleaning and inspection to prevent tankers from appearing during transportation. What's wrong. After cleaning, it is also necessary to check whether the connection of each component is normal.
Secondly, because oil and gas can easily cause fire due to static electricity, when the inside of the tank is left with a relatively high concentration of flammable gas, electrostatic belts need to be installed as required. It is forbidden to fill gasoline tankers with objects such as gasoline fuel under the high voltage wires.
Immediately afterwards, it is the routine inspection of the tank truck before each trip, such as whether the dashboard is rotating normally, the foot is braked, and whether the hand brake can work normally. Whether the steering system can work properly, all three need to be checked carefully to avoid potential safety hazards.
Finally, we will talk about the installation of small tank trucks , mainly the installation of electrostatic belts. Generally, we will install electrostatic belts at the chassis of tank trucks. If we have sufficient funds on hand, it is best to Install an electrostatically grounded alarm. Long-term transportation work will certainly cause some wear and tear, so regular and regular inspections are required. If wear is found, the rubber belt above should be put down in time.
The embedding process of Dual Interface Smart Card is not the same as the combination of embedding techniques of contact smart card and contactless smart card. It has higher requirements while it is more complicated than producing process of contact smart card or contactless smart card. Yuanmingjie Technology adopt advanced method of laser tied with guide line, meanwhile Yuanmingjie effectively combine the advanced techniques and market requirements, being accepted by more and more worldwide people.
Dual Interface Card Embedding Machine
Dual Interface Card Embedding Machine,Embedding Machine Of Dual Interface Card,Laser With Guide Line,Laser Embedding
ShenZhen YuanMingJie Technology Co., Ltd. , https://www.ymjcardmachine.com