Compared with other models of refrigerated trucks, the 3-meter refrigerated truck is still relatively common, and its practicality is stronger, and many small businesses also need to use similar vehicles. This kind of refrigerated truck itself needs a more advanced system, and it is used every day. Naturally, it still needs to guarantee its quality. And we have some maintenance-related notices when we use them everyday. Let's briefly introduce them to you today.
First, precooling is performed first. Before we use the 3-meter refrigerated truck , we must pre- cool the cargo and the interior of the cabin, and then wait for the refrigeration unit to maintain the temperature at a certain level before using it. Of course, if the temperature of the cargo itself is relatively high, and the carriage is not pre-cooled, it is easy to directly add the goods to the vehicle and increase the temperature inside the vehicle. Therefore, special attention must be paid to the pre-cooling in advance, which can also ensure the reduction of vehicle consumption. can.
Second, pay attention to check the air-conditioning system. When we load, we must pay special attention to whether the internal air-conditioning system of the 3-meter refrigerated truck is smooth. This is also to ensure the average temperature inside the cabin. We must ensure that the goods are fully laid out. It is best to maintain an evenness. Do not stack large amounts of goods on one side of the carriage. In particular, we must not allow the goods to block the air-conditioning outlets and entrances. at this point. If there is a situation where air does not circulate, check it in a timely manner to see if there is a malfunction and handle it in a timely manner.
Third, unloading should speed up. In fact, 3 meters refrigerated truck energy consumption is still relatively low, if you want to extend its useful life, in addition to paying attention to routine maintenance, usually unloading time is also faster. After the door is opened, the external air flow will enter. At this time, the temperature in the cabin will increase immediately. If the loading and unloading can not be completed quickly, not only will the cargo be deteriorated, even the vehicle's wear will increase, so it must be To find someone to unload.
Intake & Exhaust Manifold Gaskets are made of plastic, rubber, Metal, Composite Material; they keep the engine intake & exhaust system safely and efficiently.
Intake manifold gasket is a flexible, fitted part of engine that helps prevent air from leaking out during fuel combustion and help the regulate chamber temperature.
The intake manifold gasket fits between intake pipe and cylinder heads, and its main purpose is to reduce the chance of air leaking out, which can hurt the car`s efficiency.
People who have weak or faulty Intake Manifold Gaskets may notice their engines sputtering out or stalling more frequently.
The exhaust manifold gasket is more likely renewing than the intake manifold gasket, because the exhaust system heat caused more damage.
Modern exhaust Manifold Gaskets are made of beaded multilayer steel (MLS). These metal beads are always reinforced with metal sheets to resist the component movement that arises from large fluctuations in temperature. The sheet layers number is depends on distortion of the exhaust manifold and cylinder head components.
Exhaust manifold gasket leak can cause bad exhaust values, loss of power and increase the fuel consumptions.
Intake & Exhaust Manifold Gaskets
Manifold Gaskets, Intake Manifold Gaskets,Exhaust Manifold Gaskets,Engine Manifold Gaskets
HAFID INTERNATIONAL LIMITED , https://www.hapgasket.com