- Heavy duty, high performance slewing or double girder grab cranes offer a highly efficient and flexible solution for installation on barges and transshippers. Safe and precise crane operation is ensured with GHE's own crane control and management system. Specifically designed heavy duty hoisting winches, heel trim alarm systems and emergency operation functions make these cranes suitable for loading/unloading bulk cargoes in heavy sea state conditions, so ensuring efficient and uninterrupted transshipment of goods on vessels up to capesize.
-
Type CBG and type CBG 350
Two crane sizes in grab operation are available:
-CBG 300, 30 tonnes at 28 metres
-CBG 350, 35 tonnes at 36 metres or 45 tonnes at 32 metres (maximum jib length)
Compact slewing column design and low weight
Low centre of gravity due to lower position of main components
Dust prevention in the machinery room through dust filters at the pedestal entrance
Low maintenance costs
Â
Additional optional features
Extended cabin (7-8m) for optimum visibility and safer operation
Ex-centre platform of up to 10m for increased outreach allowing access to each hold
Â
Main Dimensions
 |
L1 |
L2 |
L3 |
L4 |
L5 |
H1 |
H2 |
H3 |
B1 |
B2 |
R1 |
R2 |
R3 |
D |
T |
 |
(m) |
(m) |
(m) |
(m) |
(m) |
(m) |
(m) |
(m) |
(m) |
(m) |
(m) |
(m) |
(m) |
(mm) |
(mm) |
Type 1 |
6-32.0 |
34.5 |
7.5 |
4.5 |
5.0-8.0 |
13.0 |
2.5 |
6.2 |
7.3 |
4.5 |
7.6 |
5.3 |
5.6-9.2 |
3430 to 3435 |
30-40 Â |
6-32.5 |
34.9 |
||||||||||||||
6-33.0 |
35.4 |
||||||||||||||
Type 2 |
6-33.5 |
35.9 |
7.5 |
4.5 |
5.0-8.0 |
13.5 |
2.5 |
6.2 |
7.3 |
4.5 |
7.6 |
5.3 |
5.6-9.2 |
3430 to 3435 |
30-40 |
6-34.0 |
36.4 |
||||||||||||||
6-34.5 |
36.9 |
Â
Working radius
Min. To max. Radius(with 8m extended cabin) |
12 m-36m |
Min. To max. Radius(with 5m extended cabin) |
9 m-36m |
Min. To max. Radius(with larger winch) |
9 m-32m |
Â
Service radius minimum
With hey-switch override(max. 1 heel/trim) |
6m |
Hook travel below crane rail- |
approx. 20m |
Â
Capacity in sheltered water
Grab operation from 12m-36m(max +_ 3 degrees heel/trim) |
35t |
Grab operation from 9m-36m (max +_ 3 degrees heel/trim) |
35t |
Grab operation from 9m-32m (max +_ 3 degrees heel/trim) |
45t |
Hook operation from 9m-36m |
45t |
Â
Capacity in open sea with larger winch and max 32m jib(optional)
Hook operation from 12m -32m |
45t |
Hook operation from 12m -32m- |
45t |
From 14m-32m(max +_ 3 degrees heel/trim)- |
60t |
From 14m-26m(max +_ 3 degrees heel/trim) |
80t |
Â
Capacity in open sea panamax transshipper, without counterweight
Grab operation from 12m-36m(max +_ 3 degrees heel/trim) |
35t |
Grab operation from 9m-36m(max +_ 3 degrees heel/trim)- |
35t |
Â
Weight
Crane approx.- |
incl.loose gears(jib length 36m) |
125t |
Crane approx. |
incl.loose gears(jib length 32m) |
122t |
Pedestal agapter |
cylindrical, height2.5m |
9-10.5t |
Pedestal agapter |
cylindrical, per m |
3.2t |
Counterweight approx.- |
 |
130t |
Â
Simultaneous speed
2 motions |
full load and speed |
3 motions- |
slewing/luffing full load and speed, hoisting approx. 60%(after acceleration) Â |
Â
Turnover in open sea operation
Up to 45 cycles/h |
Best average turnover of 24.000t/day unloading barges |
Each turnover up to 30.000t/day |
Â
Hoisting/Lowering
 |
 |
50Hz |
60Hz |
Hoisting/Lowering |
0-20t with |
0-75m/min |
0-90m/min |
---------------- |
0-35t with |
0-50m/min |
0-60m/min |
-------------- |
0-45t with |
0-45m/min |
0-47m/min |
---------------- |
0-60t with |
0-28m/min |
0-35m/min |
Â
Luffing
 |
Color Coated Galvalume Steel Coil Color Coated Galvalume Steel Coil,Color Coated Steel,Color Coated Steel Coil,Color Coated Galvalume Steel WENZHOU ICL INDUSTRIAL CO., LTD. , https://www.cniclsteel.com |